584662

HP Officejet Pro 8630 Manual

82
Zoom out
Zoom in
Previous page
1/268
Next page
To send a fax to multiple recipients using group speed dial
1. Load your original print-side down in the left-rear corner of the scanner glass or in the ADF.
For additional information, see
Load an original on the scanner glass on page 27 or Load an
original in the document feeder on page 28.
NOTE: If you are using the scanner glass, ensure that the automatic document feeder is
empty. Otherwise, the printer will sense the document in the ADF instead of the paper on the
scanner glass.
2.
From the printer control panel display, touch Fax and touch then
(Speed dial).
3.
Touch
(Setup).
4. Touch Group Speed Dial and follow the on-screen instruction to create a recipient group.
5. Touch the recipient group from the Select Speed Dial screen.
6. Touch Start Fax.
If the printer detects an original loaded in the automatic document feeder, it sends the document
to each number in the group speed dial entry.
NOTE: You can only use group speed dial entries to send faxes in black and white, because of
memory limitations. The printer scans the fax into memory then dials the first number. When
a connection is made, it sends the fax and dials the next number. If a number is busy or not
answering, the printer follows the settings for Busy Redial and No Answer Redial. If a connection
cannot be made, the next number is dialed and an error report is generated.
For more information about change the redial options, see
Set the redial options on page 79.
Send a fax in Error Correction Mode
Error Correction Mode (ECM) prevents loss of data due to poor phone lines by detecting errors that
occur during transmission and automatically requesting retransmission of the erroneous portion.
Phone charges are unaffected, or might even be reduced, on good phone lines. On poor phone lines,
ECM increases sending time and phone charges, but sends the data much more reliably. The default
setting is On. Turn ECM off only if it increases phone charges substantially, and if you can accept
poorer quality in exchange for reduced charges.
Before turning the ECM setting off, consider the following. If you turn ECM off:
●
The quality and transmission speed of faxes you send and receive are affected.
●
The Fax Speed is automatically set to Medium.
●
You can no longer send or receive faxes in color.
To change the ECM setting from the control panel
1. From the printer control panel display, touch and slide your finger across the screen and then
touch Setup.
2. Touch Fax Setup.
3. Touch Advanced Fax Setup.
4. Touch Error Correction Mode to turn on or off.
5. Select On or Off.
66 Chapter 5 Fax ENWW
… 82 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Officejet Pro 8630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Officejet Pro 8630 in the language / languages: English as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Officejet Pro 8630

HP Officejet Pro 8630 User Manual - German - 286 pages

HP Officejet Pro 8630 User Manual - Dutch - 276 pages

HP Officejet Pro 8630 Quick start guide - All languages - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info