655094

HP OfficeJet 4652 Manual

83
Zoom out
Zoom in
Previous page
1/136
Next page
3. On the Fax screen, touch Setup , touch Setup Wizard, and then follow the onscreen instructions.
The printer displays the status of the test on the display and prints a report.
4. Review the report.
●
If the fax test failed, review the solutions below.
●
If the fax test passed and you are still having problems faxing, verify that the fax settings listed in
the report are correct. You can also use HP's online troubleshooting wizard.
What to do if the fax test failed
If you ran a fax test and the test failed, review the report for basic information about the error. For more
detailed information, check the report to see which part of the test failed, and then review the appropriate
topic in this section for solutions to try.
The "Fax Hardware Test" failed
●
Turn the printer o by pressing (Power button) located on the printer control panel and then unplug
the power cord from the back of the printer. After a few seconds, plug the power cord in again, and then
turn the power on. Run the test again. If the test fails again, continue reviewing the troubleshooting
information in this section.
●
Try to send or receive a test fax. If you can send or receive a fax successfully, there might not be
a problem.
●
If you are running the test from the Fax Setup Wizard (Windows) or HP Utility (OS X), make sure the
printer is not busy completing another task, such as receiving a fax or making a copy. Check the display
for a message indicating that the printer is busy. If it is busy, wait until it is nished and in the idle state
before running the test.
●
Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord
to connect from the telephone wall jack to the printer, you might not be able to send or receive faxes.
After you plug in the phone cord that came with the printer, run the fax test again.
●
If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that
plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the
telephone wall jack.
After you resolve any problems found, run the fax test again to make sure it passes and the printer is ready
for faxing. If the Fax Hardware Test continues to fail and you experience problems faxing, contact HP
support. Go to www.hp.com/support . This website provides information and utilities that can help you
correct many common printer problems. If prompted, select your country/region, and then click All HP
Contacts for information on calling for technical support.
The "Fax Connected to Active Telephone Wall Jack" test failed
●
Check the connection between the telephone wall jack and the printer to make sure the phone cord is
secure.
●
Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord
to connect from the telephone wall jack to the printer, you might not be able to send or receive faxes.
After you plug in the phone cord that came with the printer, run the fax test again.
●
Make sure you have correctly connected the printer to the telephone wall jack. Using the phone cord
supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other
end to the port labeled 1-LINE on the back of the printer.
Learn more about fax setup and test, click here to go online for more information.
ENWW Fax issues 77
… 83 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP OfficeJet 4652 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP OfficeJet 4652 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP OfficeJet 4652

HP OfficeJet 4652 User Manual - German - 146 pages

HP OfficeJet 4652 User Manual - Dutch - 146 pages

HP OfficeJet 4652 Quick start guide - All languages - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info