607089
129
Zoom out
Zoom in
Previous page
1/190
Next page
The printer is having problems sending and receiving faxes
Make sure the Power button light of the printer is on. If the light is off and the printer display is blank,
make sure the power cord is firmly connected to the printer and plugged into a power outlet, and then
press the Power button to turn on the printer.
After turning on the printer, HP recommends you wait five minutes before sending or receiving a fax.
The printer cannot send or receive faxes while it is initializing after being turned on.
Make sure you used the phone cord supplied in the box with the printer to connect to the telephone wall
jack. One end of the phone cord should be connected to the port labeled 1-LINE on the back of the
printer and the other end to your telephone wall jack, as shown in the illustration.
1 Telephone wall jack
2 Use the phone cord supplied in the box with the printer to connect to the "1-LINE" port
If the phone cord that came with the printer is not long enough, you can use a longer 2-wire phone cord
to extend the length. You can purchase the cord at an electronics store that carries phone accessories.
Try connecting a working phone and phone cord to the telephone wall jack that you are using for the
printer and check for a dial tone. If you do not hear a dial tone, call your local telephone company for
service.
Other equipment, which uses the same phone line as the printer, might be in use. For example, you
cannot use the printer for faxing if an extension phone is off the hook, or if you are using a computer
dial-up modem to send an email or access the Internet.
Check to see if another process has caused an error. Check the display or your computer for an error
message providing information about the problem and how to solve it. If there is an error, the printer
cannot send or receive a fax until the error condition is resolved.
The phone line connection might be noisy. Phone lines with poor sound quality (noise) can cause faxing
problems. Check the sound quality of the phone line by plugging a phone into the telephone wall jack
and listening for static or other noise. If you hear noise, turn Error Correction Mode (ECM) off and try
faxing again. For information about changing ECM, see
Send a fax in Error Correction Mode on page 56.
If the problem persists, contact your telephone company.
If you are using a digital subscriber line (DSL) service, make sure that you have a DSL filter connected or
you cannot fax successfully.
Click here to go online for more information.
Make sure the printer is not connected to a telephone wall jack that is set up for digital phones. To check
if your phone line is digital, connect a regular analog phone to the line and listen for a dial tone. If you
do not hear a normal sounding dial tone, it might be a phone line set up for digital phones.
ENWW Fax issues 123
129


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP OfficeJet 3832 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP OfficeJet 3832 in the language / languages: English as an attachment in your email.

The manual is 5,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP OfficeJet 3832

HP OfficeJet 3832 User Manual - German - 198 pages

HP OfficeJet 3832 User Manual - Dutch - 198 pages

HP OfficeJet 3832 User Manual - French - 198 pages

HP OfficeJet 3832 Quick start guide - All languages - 70 pages

HP OfficeJet 3832 Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info