510673
60
Zoom out
Zoom in
Previous page
1/67
Next page
Troubleshooting
Compaq iPAQ Microportable Projector MP1200 User’s Guide 8–5
Only the Compaq startup screen
displays.
1. Check that the cables are connected
securely.
2. Verify that the proper input source is
connected.
3. Make sure your notebook
computer’s external video port is
activated.
A blue screen displays on the
projection screen when a
videocassette recorder, DVD
player, or other video source is
connected to the projector.
1. Check the Play or TV/Video buttons
on the video source.
2. If that does not work, refer to the
owner’s manual that came with the
video source.
The projector makes a “ticking”
sound when it is turned on and the
projector lamp does not go on.
1. The projector lamp is too hot to light.
Turn the projector off and wait for it
to cool down before turning it on
again.
2. The projector lamp is not making a
good connection. Check to be sure
the lamp module is installed
correctly. Refer to “Replacing the
Projector Lamp Module” in
Chapter 7 for more information.
3. The projector lamp has reached the
end of its life. Replace the lamp as
described in the “Replacing the
Projector Lamp Module” section of
Chapter 7.
Troubleshooting
(Continued)
Problem Solutions
261799-001.book!!Page!5!!Thursday,!April!25,!2002!!3:13!PM
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP MP1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP MP1200 in the language / languages: English as an attachment in your email.

The manual is 4,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info