20200
183
Zoom out
Zoom in
Previous page
1/304
Next page
Light Explanation and solution
Off The printer might be in PowerSave mode.
Press any button on the printer control panel.
The accessory is not receiving power. Turn
the printer power off. Check that the
accessory is properly seated on and
connected to the printer, without any gaps
between the printer and the accessory. Turn
the printer power on.
The accessory might have been
disconnected and reconnected while the
printer power was on. 66.XY.ZZ
EXTERNAL DEVICE FAILURE appears on
the printer control panel display. See the
section for this message in
Interpreting
control-panel messages.)
The job might have stalled between the
printer and the accessory. PROCESSING
JOB appears on the printer control-panel
display. Turn the printer power off, and then
turn the printer power on.
Replacing accessories or accessory components
If you are unable to resolve problems that are indicated by the stacker or stapler/stacker
accessory lights, contact the HP Customer Care Center. (See
HP customer care.) If an HP
Customer Care Center representative recommends replacement of the stacker, stapler/
stacker, or stapler/stacker components, you can either perform the replacement procedure
yourself or have an HP-authorized dealer replace it.
For the steps to replace the entire stacker accessory or the entire stapler/stacker
accessory, see the install guide that came with the accessory.
For the steps to replace the stapler unit, see
Replacing the stapler unit.
For the steps to replace the staple cartridge, see
Loading staples.
For more details about ordering replacement parts or supplies, see
Ordering parts,
accessories, and supplies and Part numbers.
ENWW Understanding accessory lights for the stacker and stapler/stacker 171
183


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info