20200
175
Zoom out
Zoom in
Previous page
1/304
Next page
Control panel message Description Recommended action
No job to cancel The S
TOP
button was pressed, but there
is no active job or buffered data to cancel.
The message is displayed for
approximately 2 seconds before the
printer returns to the ready state.
No action necessary.
NON HP SUPPLY
INSTALLED
Economode disabled
The printer has detected that the print
cartridge is not a genuine HP supply.
This message is displayed until you
install an HP cartridge or press the
override button
(S
ELECT
button).
If you believe you purchased a genuine
HP supply, go to http://www.hp.com/go/
anticounterfeit.
Any printer repair required as a result of
using non-HP supplies or unauthorized
supplies is not covered under the printer
warranty.
NON HP SUPPLY
INSTALLED
For help press
The printer has detected that the print
cartridge is not a genuine HP supply.
This message is displayed until you
install an HP cartridge or press the
override button
(S
ELECT
button).
If you believe you purchased a genuine
HP supply, go to http://www.hp.com/go/
anticounterfeit.
Any printer repair required as a result of
using non-HP supplies or unauthorized
supplies is not covered under the printer
warranty.
ORDER CARTRIDGE
LESS THAN XXXX PAGES
For help press
alternates with
<current status
message>
For the HP LaserJet 4250 series, the
message first appears when about 15%
(10,000-page cartridge) or about 8%
(20,000-page cartridge) of the life
remains in the print cartridge. For the
HP LaserJet 4350 series, the message
first appears when about 25% (10,000-
page cartridge) or about 15% (20,000-
page cartridge) of the life remains in the
print cartridge.
Make sure that you have a new cartridge
ready (see
Ordering parts, accessories,
and supplies).
OUTPUT PAPER PATH
OPEN
For help press
The paper path between the printer and
the output device is open and must be
closed before printing can continue.
1. Make sure the jam-access door on
the optional stacker or stapler/
stacker is closed.
2. If the accessory is a stapler/stacker,
make sure that the stapler unit is
snapped into the closed position.
Paused
To return to ready
press STOP
The printer is paused but continues to
receive data until the memory is full. The
printer is not experiencing an error.
Press S
TOP
.
Interpreting control-panel messages (continued)
ENWW Understanding printer messages 163
175


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info