20200
168
Zoom out
Zoom in
Previous page
1/304
Next page
Control panel message Description Recommended action
8X.YYYY
EIO ERROR
The EIO accessory card in slot [X] has
encountered a critical error.
1. Turn the printer power off and then
on.
2. Turn the printer power off, reseat
the EIO accessory in slot [X], and
then turn the printer power on.
3. Turn the printer power off, remove
the EIO accessory from slot [X],
install it in a different EIO slot, and
then turn the printer power on.
4. Replace the EIO accessory in slot
[X].
8X.YYYY EMBEDDED
JETDIRECT ERROR
The embedded HP Jetdirect print server
has encountered a critical error.
1. Turn the printer power off and then
on.
2. If the message persists, contact an
HP-authorized service or support
provider (see
HP customer care).
<BINNAME> FULL
Remove all paper
from bin
The indicated output bin [BINNAME] is
full, and printing cannot continue.
Empty the bin so that the current print
job can finish.
<BINNAME> FULL
Remove all paper
from bin
alternates with
<current status
message>
The indicated output bin [BINNAME] is
full, but it is not needed for the current
print job.
Empty the bin before sending a job to
that bin.
Access denied
MENUS LOCKED
The printer control panel function you
are trying to use has been locked to
prevent unauthorized access.
See your network administrator.
BAD DUPLEXER
CONNECTION
For help press
The optional duplexer is not properly
connected to the printer.
1. Make sure that you are using the
right-angle power cord that came
with the printer.
2. Try removing and reinstalling the
optional duplexer. Then turn the
printer power off and back on.
BAD ENV FEEDER
CONNECTION
The optional envelope feeder is not
connected properly to the printer.
Try removing and reinstalling the
optional envelope feeder. Then, turn the
printer power off and back on.
Canceling... The printer is canceling a job. The
message continues while the job is
stopped, the paper path is cleared, and
any remaining incoming data on the
active data channel is received and
discarded.
No action necessary.
Interpreting control-panel messages (continued)
156 Chapter 4 Problem solving ENWW
168


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info