20200
162
Zoom out
Zoom in
Previous page
1/304
Next page
Control panel message Description Recommended action
22 USB I/O
BUFFER OVERFLOW
To continue press
Too much data was sent to the USB port.
Press (S
ELECT
button) to clear the
error message. (The job will not be
printed.)
40 EIO X BAD
TRANSMISSION
To continue press
The connection has been broken
between the printer and the EIO card in
the specified slot [X].
Note: EIO 0 is reserved for the
HP Jetdirect embedded print server.
Press (S
ELECT
button) to clear the
error message and continue printing.
41.3 UNEXPECTED
SIZE IN TRAY X
For help press
alternates with
LOAD TRAY XX
[TYPE][SIZE]
To use another
tray press
or
For help press
This is typically caused if two or more
sheets stick together in the printer or if
the tray is not properly adjusted.
1. Reload the tray with the correct
paper size.
2.
Press
(S
ELECT
button) to scroll to
TRAY XX SIZE=. Reconfigure the
size in a tray so that the printer will
use a tray that contains the size
required for the print job.
3. If the error does not clear, turn the
printer power off, then turn the
printer power on.
4. If the message persists, contact an
HP-authorized service or support
provider (see
HP customer care).
41.X ERROR
For help press
alternates with
41.X ERROR
To continue press
A temporary printing error occurred. 1.
Press
(S
ELECT
button). The page
containing the error automatically
reprints if jam recovery is enabled.
2. Turn the printer power off, and then
turn the printer power on.
3. If the message persists, contact an
HP-authorized service or support
provider (see
HP customer care).
49.XXXXX ERROR
To continue
turn off then on
A critical firmware error has occurred. 1. Turn the printer power off, leave it
off for 20 minutes, and then turn the
printer power on.
2. If the message persists, contact an
HP-authorized service or support
provider (see
HP customer care).
50.X FUSER ERROR
For help press
A fuser error has occurred. 1. Turn the printer power off and then
on.
2. If the message persists, contact an
HP-authorized service or support
provider (see
HP customer care).
Interpreting control-panel messages (continued)
150 Chapter 4 Problem solving ENWW
162


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info