20200

HP LASERJET4350 Manual

158
Zoom out
Zoom in
Previous page
1/304
Next page
3. Insert the staple cartridge into the stapler unit, and rotate the stapler unit toward the rear
of the printer until the unit snaps into place.
The stapler needs to reload after clearing a staple jam, so the first few documents (up to
five) might not be stapled. If a print job is sent and the stapler is jammed or is out of staples,
the job will still print as long as the path to the stacker bin is not blocked.
Solving repeated jams
If paper jams occur frequently, try the following:
● Check all the jam locations. (See
Clearing jams.) A piece of media might be stuck
somewhere in the printer. Even a small torn piece of media in the printer path can cause
repeated jams.
● Check that the trays are properly adjusted. (See
Loading trays.) The guides should click
into place without being too tight against the media.
● Check that media is correctly loaded in the trays and that the trays are not overfilled.
Make sure that the stack is under the tabs and below the maximum-height indicators.
See
Loading trays.
● Check that all trays and paper-handling accessories are completely inserted into the
printer. (If a tray is opened during a print job, this might cause a jam.)
● Check that all covers and doors are closed. (If a cover or door is opened during a print
job, this might cause a jam.)
● Try printing to a different output bin. (See
Understanding media output options.)
● The sheets might be sticking together. Try bending the stack to separate each sheet. Do
not fan the stack.
● If you are printing from tray 1, try reducing the size of the stack.
● If you are printing from the optional envelope feeder, make sure that it is loaded correctly
(with the bottom envelopes in slightly farther than the top envelopes). (See
Loading
envelopes in the optional envelope feeder.)
● If you are printing small sizes, feed the media with the short-edge first. (See
Guidelines
for custom-size paper.)
● Turn over the stack of media in the tray. Also try rotating the paper 180 degrees.
● Check the characteristics of the paper or other print media that you are using. Use only
media that meets HP specifications. (See
Paper specifications.) Try using different
media to see if the problem goes away. Do not use curled, deformed, damaged, or
irregular media.
● Check that the environmental conditions for the printer are met. (See
Operating
environment.)
● Avoid using paper that has already been used in a printer or copier.
● Try using paper from a freshly opened ream.
146 Chapter 4 Problem solving ENWW
… 158 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info