20200
154
Zoom out
Zoom in
Previous page
1/304
Next page
Clearing jams from the fuser area
Use this procedure only in these situations:
Media has jammed inside the fuser and cannot be removed from the top-cover area or
the rear-output area.
A sheet of media has torn while you were trying to clear a jam from the fuser.
To clear jams from the fuser area
1. Turn the printer power off and unplug the power cord from the printer.
WARNING!
The fuser is very hot. To avoid minor burns, wait 30 minutes for the fuser to cool before
removing it from the printer.
2. Turn the printer so that its rear cover faces you. If it is installed, remove the optional
duplexer by lifting it up and then pulling it out.
3. Open the rear output bin and pull the extension outward until it stops.
4. Remove the rear output bin and extension by bending the middle of the bin down and
releasing the two hinge pins.
2
1
2
142 Chapter 4 Problem solving ENWW
154


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info