20200
153
Zoom out
Zoom in
Previous page
1/304
Next page
Clearing jams from the output areas
Use the procedures in this section to clear jams that occur in the rear output bin or in the
optional stacker or stapler/stacker.
To clear jams from the rear output bin
1. Open the rear output bin. If most of the media is still inside the printer, it might be easier
to remove it through the top-cover area. (See
To clear jams from the top-cover and print-
cartridge areas.)
2. Grasp both sides of the media, and slowly pull the media out of the printer. (Loose toner
might be on the sheet. Be careful not to spill it on yourself or into the printer.)
NOTE
If the jammed media is difficult to remove, try opening the top cover all the way to release
pressure on the paper. If the sheet has torn, or if you still cannot remove it, see
Clearing
jams from the fuser area.
3. Close the rear output bin.
4. Open and close the top cover to clear the jam message.
5. If a jam message persists, a sheet is still jammed in the printer. Look for the jam in
another location. (See
Jam locations.)
ENWW Clearing jams 141
153


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info