20200
127
Zoom out
Zoom in
Previous page
1/304
Next page
Performing preventive maintenance
You should replace certain parts when the PERFORM PRINTER MAINTENANCE message
appears on the printer control panel display. This will help ensure that your printer maintains
optimum performance.
The maintenance message will appear every 200,000 pages. The message can be
temporarily cleared for approximately 10,000 pages by using the CLEAR MAINTENANCE
MESSAGE item on the Resets submenu. (See
Resets submenu.) To check the number of
pages the printer has printed since new maintenance-kit components were installed, print
either a configuration page or a supplies status page. (See
Configuration page or Supplies
status page for details.)
To order the printer maintenance kit, see
Part numbers. The kit includes:
fuser
rollers (transfer, pickup, and feed)
installation instructions
NOTE
The printer maintenance kit is a consumable item and is not covered under the original
printer warranty or under most extended warranties.
After a maintenance kit is installed, the maintenance-kit counter must be reset.
To reset the maintenance-kit counter
1. Turn the printer power off and then on.
2.
When XXX appears on the control-panel display, press and hold down
(S
ELECT
button). Continue holding down (S
ELECT
button) until all three printer control panel
lights flash once, and then stay on. This might take up to 10 seconds.
3.
Release
(S
ELECT
button) and press (U
P
button) to scroll to NEW MAINTENANCE KIT.
4.
Press
(S
ELECT
button) to reset the maintenance-kit counter.
NOTE
Perform this procedure only after a maintenance kit has been installed. Do not use this
procedure to temporarily clear the PERFORM PRINTER MAINTENANCE message.
ENWW Performing preventive maintenance 115
127


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info