20200

HP LASERJET4350 Manual

85
Zoom out
Zoom in
Previous page
1/304
Next page
Layout options for printing on both sides of paper
The four duplex orientation options are shown below. These options can be selected in the
printer driver (the preferred method) or at the printer control panel. (If you use the printer
control panel, go to Configure Device menu, then the Printing submenu. Select DUPLEX
BINDING. On the PCL submenu, select a setting for ORIENTATION.)
2
3
5
25
3
3
5
2
3
5
2
1
2
3
4
1. Long-edge landscape* This layout is often used in accounting, data processing, and
spreadsheet programs. Every other printed image is oriented
upside-down. Facing pages are read continuously from top to
bottom.
2. Short-edge landscape Each printed image is oriented right-side-up. Facing pages are
read from top to bottom on the left page, then from top to bottom
on the right page.
3. Long-edge portrait This is the default printer setting, and the most common layout
used, with every printed image oriented right-side-up. Facing
pages are read from top to bottom on the left page, then from top
to bottom on the right page.
4. Short-edge portrait* This layout is often used with clipboards. Every other printed
image is oriented upside-down. Facing pages are read
continuously from top to bottom.
* When using Windows drivers, select Flip Pages Up to get the designated binding options.
To duplex with the optional duplex-printing accessory
1. Insert enough paper into one of the trays to accommodate the print job. If you are
loading special paper such as letterhead, load it in one of the following ways:
● For tray 1, load the letterhead paper with the front side down, bottom-edge first.
● For all other trays, load the letterhead paper with front side up, and the top edge
toward the back of the tray.
CAUTION
Do not load paper that is heavier than 105 g/m
2
(28 lb bond). Jamming could result.
2. Open the printer driver (see
Changing the settings for a print job).
3. On the Finishing tab, click Print on Both Sides. For Macintosh, click File, click Print,
and then click Layout.
ENWW Printing on both sides of paper (optional duplexer) 73
… 85 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info