20200

HP LASERJET4350 Manual

29
Zoom out
Zoom in
Previous page
1/304
Next page
To show the IP address
1. Press M
ENU
to open the menus.
2.
Press
(D
OWN
button) to highlight CONFIGURE DEVICE.
3.
Press
(S
ELECT
button) to select CONFIGURE DEVICE.
4.
Press
(D
OWN
button) to highlight SYSTEM SETUP.
5.
Press
(S
ELECT
button) to select SYSTEM SETUP.
6.
Press
(D
OWN
button) to highlight SHOW ADDRESS.
7.
Press
(S
ELECT
button) to select SHOW ADDRESS.
8.
Press
(U
P
button) or (D
OWN
button) to select the desired option.
9.
Press
(S
ELECT
button) to select the option.
10. Press M
ENU
to exit the menu.
Tray behavior options
Four user-defined options are available for tray behavior:
● USE REQUESTED TRAY. Selecting EXCLUSIVELY ensures that the printer does not
automatically select another tray when you indicate that a specific tray should be used.
Selecting FIRST allows the printer to pull from a second tray if the specified tray is
empty. EXCLUSIVELY is the default setting.
● MANUALLY FEED PROMPT. If you select ALWAYS (the default value), the system
always shows a prompt before pulling from the multipurpose tray. If you select UNLESS
LOADED, the system displays the prompt only if the multipurpose tray is empty.
● PS DEFER MEDIA. This setting affects how non-HP PostScript drivers behave with the
printer. You do not need to change this setting if you use the drivers that HP supplies. If
set to ENABLED, non-HP PostScript drivers use the same HP tray selection method as
the HP drivers. If set to DISABLED, some non-HP PostScript drivers use the PostScript
tray selection method instead of the HP method.
● SIZE/TYPE PROMPT. Use this item to control whether the tray configuration message
and its corresponding prompts are shown whenever a tray is opened and closed. These
prompts instruct you to change the type or size if the tray is configured for a different
type or size than is loaded in the tray.
ENWW Control panel 17
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info