20192
173
Zoom out
Zoom in
Previous page
1/222
Next page
ESWW Menú Configurar dispositivo 171
Submenú E/S
Los elementos en el menú E/S (entrada/salida) afectan a la comunicación entre la impresora y el
PC. El contenido del submenú E/S depende de la tarjeta EIO que esté instalada.
La siguiente sección enumera la configuración y los posibles valores. En la columna Valores, el
valor predeterminado de cada configuración es el que tiene un asterisco (*) a su lado.
Elemento Valores Explicación
TIEMPO LÍMITE DE
E/S
De
5
a
300
(*
15
) Selecciona el periodo de tiempo de E/S en segundos.
Este valor permite ajustar el tiempo para obtener el
máximo rendimiento. Si aparecen datos de otros puertos
en medio del trabajo de impresión, aumente el valor del
tiempo indicado.
ENTRADA PARALELA No hay valores
para seleccionar.
Configura las funciones paralelas.
VELOCIDAD ALTA NO
*SÍ
Seleccione SÍ para que la impresora pueda aceptar la
comunicación paralela de mayor velocidad que se utiliza
para las conexiones con los PC más nuevos.
FUNCIONES
AVANZADAS
DESACTIVADO
*ACTIVADO
Activa o desactiva la comunicación paralela bidireccional.
El valor predeterminado se establece para un puerto
paralelo bidireccional (IEEE-1284).
Esta función permite a la impresora enviar al PC mensajes
de respuesta de las peticiones de estado. (Si se activan las
funciones paralelo avanzadas se reducirá la velocidad de
cambio de lenguaje.)
EIO [X] No hay valores
para seleccionar.
La [X] representa la ranura en la que se instala el servidor
de impresión opcional de HP Jetdirect, si hay alguno. El
submenú que aparezca dependerá del tipo de servidor de
impresión que esté instalado.
TCP/IP No hay valores para seleccionar.
ACTIVAR DESACTIVADO
*ACTIVADO
Seleccione si la pila del protocolo TCP/IP está habilitada o
inhabilitada. Puede establecer varios parámetros TCP/IP.
MÉTODO DE
CONFIG.
*BootP
DHCP
MANUAL
Seleccione el método de configuraciónTCP/IP.
Para la opción MANUAL, establezca los valores para
DIRECCIÓN IP, MÁSCARA DE SUBRED, PASARELA
PREDETERMINADA, SERVIDOR SYSLOG y TIEMPO DE
INACTIVIDAD.
IPX/SPX No hay valores para seleccionar.
ACTIVAR DESACTIVADO
*ACTIVADO
Selecciónela si desea que la pila del protocolo IPX/
SPX (en redes Novell NetWare, por ejemplo) está
habilitada o inhabilitada.
TIPO TRAMA *AUTO
DESACTIVADO
Selecciónela si desea que el tipo de trama se determine
automáticamente o se desactive.
APPLETALK No hay valores para seleccionar.
ACTIVAR DESACTIVADO
*ACTIVADO
Seleccione si la pila del protocolo Apple EtherTalk está
habilitada o inhabilitada.
DLC/LLC No hay valores para seleccionar.
ACTIVAR DESACTIVADO
*ACTIVADO
Seleccione si la pila del protocolo DLC/LLC está habilitada
o inhabilitada.
173


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4200 in the language / languages: Spanish as an attachment in your email.

The manual is 5,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP LASERJET4200

HP LASERJET4200 User Manual - English - 218 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info