20192

HP LASERJET4200 Manual

84
Zoom out
Zoom in
Previous page
1/218
Next page
82 3 Managing and maintaining the printer ENWW
Print-cartridge interaction (shaking)
When you install a print cartridge for the first time, gently shake it from side to side to distribute
the toner evenly inside the print cartridge. Due to the cartridge design, this is the only time you
will need to shake the print cartridge.
Cartridge Low and Cartridge Out conditions
The printer alerts you if the print cartridge is low on toner or out of toner.
When the cartridge is low on toner
When the cartridge is low on toner, the printer control panel shows the ORDER CARTRIDGE
message. The
ORDER CARTRIDGE message first appears when about 15 percent of the toner
remains in the print cartridge (at 5 percent coverage, about 1,800 pages remaining for the
12,000-page cartridge in the HP LaserJet 4200 series and about 2,700 pages remaining for the
18,000-page cartridge in the HP LaserJet 4300 series).
The default is for the printer to continue printing until the toner runs out, but you might prefer to
have the printer stop instead of continuing when the
ORDER CARTRIDGE message first appears —
for example, if you want print quality to remain consistently high during print jobs, or if you do not
want the cartridge to run out during a long print job. To configure the printer to stop, set
CARTRIDGE LOW=STOP (in the System Setup submenu of the Configure Device menu). (See
“CARTRIDGE LOW” on page 163.) Then, when
ORDER CARTRIDGE appears, the printer will stop
printing. You can resume printing by pressing S
ELECT ( ) for each print job.
When the cartridge is out of toner or drum life
The REPLACE CARTRIDGE message appears in one of these situations:
When the print cartridge is out of toner. If CARTRIDGE OUT is set to CONTINUE (in the
System Setup submenu of the Configure Device menu), the printer continues printing
without interaction until the cartridge reaches the end of drum life. HP does not guarantee
print quality after the REPLACE CARTRIDGE message is first displayed. Replace the print
cartridge as soon as possible. (See “Ordering information” on page 17.)
The REPLACE
CARTRIDGE message remains until you replace the print cartridge. If CARTRIDGE OUT is set to
STOP, the printer stops printing until you replace the print cartridge or resume printing by
pressing S
ELECT ( ) for each print job.
When the drum life of the print cartridge is out. You must replace the print cartridge to
continue printing. No override is possible, even if toner remains in the cartridge. (See
“Ordering information” on page 17.)
This situation occurs to protect the printer.
… 84 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4200 in the language / languages: English as an attachment in your email.

The manual is 5,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP LASERJET4200

HP LASERJET4200 User Manual - Spanish - 222 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info