655154

HP LaserJet Pro MFP M426 Manual

94
Zoom out
Zoom in
Previous page
1/186
Next page
Set up to send and receive faxes
●
Before starting
●
Step 1: Identify the phone connection type
●
Step 2: Set up the fax
●
Step 3: Configure the fax time, date, and header
●
Step 4: Run a fax test
Before starting
Make sure that the printer was fully set up before connecting the fax service.
NOTE: Use the telephone cable and any adapters that shipped with the printer to connect the printer to the
telephone jack.
NOTE: In countries/regions that use serial telephone systems, an adapter is shipped with the printer. Use
the adapter to connect other telecom devices to the same telephone jack the printer is connected to.
Complete the instructions in each of the following four steps:
Step 1: Identify the phone connection type on page 82.
Step 2: Set up the fax on page 83.
Step 3: Configure the fax time, date, and header on page 86.
Step 4: Run a fax test on page 88.
Step 1: Identify the phone connection type
Review the following equipment and service types to determine which setup method to use. The method
used depends on the equipment and services already installed on the phone system.
NOTE: The printer is an analog device. HP recommends using the printer on a dedicated analog telephone
line.
●
Dedicated phone line: The printer is the only piece of equipment or service connected to the phone line
●
Voice calls: Voice and fax calls use the same phone line
●
Answering machine: An answering machine answers voice calls on the same phone line used for fax
calls
●
Voice mail: A voice-mail subscription service uses the same phone line as the fax
●
Distinctive ring service: A service from the telephone company that allows several phone numbers to
be associated with one phone line, and each number has a different ring pattern; the printer detects the
ring pattern assigned to it and answers the call
●
Computer dial-up modem: A computer uses the phone line to connect to the Internet through a dial-up
connection
●
DSL line: A digital subscriber line (DSL) service from the telephone company; this service might be called
ADSL in some countries/regions
82 Chapter 7 Fax ENWW
… 94 …


Need help? Post your question in this forum.

Forumrules
1

Forum

hp-laserjet-pro-mfp-m426

Reset search

  • can I scan multiple pages to one to upload for review Submitted on 10-10-2020 at 19:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LaserJet Pro MFP M426 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LaserJet Pro MFP M426 in the language / languages: English as an attachment in your email.

The manual is 9,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP LaserJet Pro MFP M426

HP LaserJet Pro MFP M426 User Manual - German - 194 pages

HP LaserJet Pro MFP M426 User Manual - Dutch - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info