457230

HP LASERJET PRO CP1025 Manual

137
Zoom out
Zoom in
Previous page
1/184
Next page
The product does not print or it prints slowly
The product does not print
If the product does not print at all, try the following solutions.
1. Make sure the product is turned on and that the control panel indicates it is ready.
◦
If the control panel does not indicate the product is ready, turn off the product and disconnect
the power cable from the product. Wait 30 seconds and then reconnect the power cord and
turn on the product. Wait for the product to initialize.
◦
If the control panel indicates the product is ready, press and hold the Resume
button for
two to three seconds to print a configuration page. If successful, try sending the job again.
2. If the control panel indicates the product has an error, resolve the error and then try sending the
job again.
3. Make sure the cables are all connected correctly. If the product is connected to a network, check
the following items:
◦
Check the light next to the network connection on the product. If the network is active, the
light is green.
◦
Make sure that you are using a network cable and not a phone cord to connect to the
network.
◦
Make sure the network router, hub, or switch is turned on and that it is working correctly.
4. Install the HP software from the CD that came with the product. Using generic printer drivers can
cause delays clearing jobs from the print queue.
5. If you are using a personal firewall system on the computer, it might be blocking communication
with the product. Try temporarily disabling the firewall to see if it is the source of the problem.
6. If your computer or the product is connected to a wireless network, low signal quality or
interference might be delaying print jobs.
The product prints slowly
If the product prints, but it seems slow, try the following solutions.
1. Make sure the computer meets the minimum specifications for this product. For a list of
specifications, go to this Web site:
www.hp.com/support/ljcp1020series.
2. When you configure the product to print on some paper types, such as heavy paper, the product
prints more slowly so it can correctly fuse the toner to the paper. If the paper type setting is not
correct for the type of paper you are using, change the setting to the correct paper type.
3. If your computer or the product is connected to a wireless network, low signal quality or
interference might be delaying print jobs.
4. The product might be in cool down mode.
ENWW
The product does not print or it prints slowly
125
… 137 …


Need help? Post your question in this forum.

Forumrules
1

Forum

hp-laserjet-pro-cp1025

Reset search

  • How do I clean all the rollers on this printer.?

    Paper advances an inch or so then the machine shuts down. I have to pull out the paper and open all the doors for the machine to reset.
    Submitted on 12-5-2022 at 00:33

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET PRO CP1025 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET PRO CP1025 in the language / languages: English as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP LASERJET PRO CP1025

HP LASERJET PRO CP1025 User Manual - German - 194 pages

HP LASERJET PRO CP1025 User Manual - Dutch - 182 pages

HP LASERJET PRO CP1025 User Manual - French - 194 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info