584678
75
Zoom out
Zoom in
Previous page
1/308
Next page
To prevent other users from accessing your network, turn on WPA or WEP data encryption.
Wired Equivalent Privacy (WEP): WEP is the original native security mechanism in the 802.11
standard. You create a unique key containing hexadecimal or alphanumeric characters, which
other users must provide before they can access your network.
Wi-Fi Protected Access (WPA): WPA uses the temporal key integrity protocol (TKIP) for encryption
and employs 802.1X authentication. It addresses all known weaknesses of WEP. You create a
unique passphrase containing a combination of letters and numbers, which other users must
provide before they can access your network.
WPA2 provides the advanced encryption standard (AES), and is an improvement over WPA.
Connect the product to an ad-hoc wireless network
You can connect the product wirelessly to a computer through a peer-to-peer (ad-hoc) installation.
1. Make sure the product is not connected to the network with an Ethernet cable.
2. Turn on the product, and then turn on the wireless functionality.
3. Make sure the product is using the factory default network settings.
4. Turn on the product the wireless functionality again.
5. Print a Network Summary page and find the wireless network name (SSID). Open the Reports
menu, and then select the Network Summary option.
6. Refresh the list of wireless networks on your computer, and then click the product wireless network
name (SSID) and connect to it.
7. After several minutes, print a configuration page, and then find the product IP address.
8. At the computer, insert the product CD, and follow the on-screen instructions to install the software.
When prompted, select the Connect through a wireless network option.
Configure IP network settings
View or change network settings
Use the embedded Web server to view or change IP configuration settings.
1. Print a configuration page, and locate the IP address.
If you are using IPv4, the IP address contains only digits. It has this format:
xxx.xxx.xxx.xxx
If you are using IPv6, the IP address is a hexadecimal combination of characters and digits.
It has a format similar to this:
xxxx::xxxx:xxxx:xxxx:xxxx
2. To open the HP Embedded Web Server, type the IP address (IPv4) into the address line of a Web
browser. For IPv6, use the protocol established by the Web browser for entering IPv6 addresses.
3. Click the Networking tab to obtain network information. You can change settings as needed.
ENWW Connect to a network 59
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET PRO CM1410 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET PRO CM1410 series in the language / languages: English as an attachment in your email.

The manual is 5,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP LASERJET PRO CM1410 series

HP LASERJET PRO CM1410 series Quick start guide - English - 18 pages

HP LASERJET PRO CM1410 series Quick start guide - German - 22 pages

HP LASERJET PRO CM1410 series User Manual - German - 328 pages

HP LASERJET PRO CM1410 series Quick start guide - Dutch - 20 pages

HP LASERJET PRO CM1410 series User Manual - Dutch - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info