583115

HP LASERJET PRO 200 COLOR MFP M276 Manual

104
Zoom out
Zoom in
Previous page
1/238
Next page
Configure receive fax settings
Set fax forwarding
You can set your product to forward incoming faxes to another fax number. When the fax arrives at
your product, it is stored in the memory. The product then dials the fax number that you have specified
and sends the fax. If the product cannot forward a fax because of an error (for example, the number is
busy) and repeated redial attempts are unsuccessful, your product prints the fax.
If the product runs out of memory while receiving a fax, it terminates the incoming fax and only
forwards the pages and partial pages that have been stored in the memory.
When it is using the fax-forwarding feature, the product (rather than the computer) must be receiving
the faxes, and the answer mode must be set to Automatic.
1. From the Home screen, touch the Fax button.
2. Touch the Fax Menu button.
3. Touch the Receive Options button.
4. Touch the Forward Fax button, and touch the On button.
5. Use the keypad to enter the fax-forwarding number, and then touch the OK button.
Set the answer mode
Depending on the situation, set the product answer mode to Automatic, TAM, Fax/Tel, or Manual. The
factory-set default is Automatic.
●
Automatic: The product answers incoming calls after a specified number of rings or upon
recognition of special fax tones.
●
TAM: The product does not automatically answer the call. Instead, it waits until it detects the fax
tone.
●
Fax/Tel: The product answers incoming calls immediately. If it detects the fax tone, it processes the
call as a fax. If it does not detect the fax tone, it creates an audible ring to alert you to answer the
incoming voice call.
●
Manual: The product never answers calls. You must start the fax-receiving process yourself, either
by touching the Start Fax button on the control panel or by picking up a telephone that is
connected to that line and dialing 1-2-3.
To set or change the answer mode, complete the following steps:
1. From the Home screen, touch the Setup
button.
2. Touch the Fax Setup menu.
3. Touch the Basic Setup menu.
4. Scroll to and touch the Answer Mode button, and then touch the name of the option that you want
to use.
88 Chapter 6 Fax ENWW
… 104 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET PRO 200 COLOR MFP M276 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET PRO 200 COLOR MFP M276 in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP LASERJET PRO 200 COLOR MFP M276

HP LASERJET PRO 200 COLOR MFP M276 User Manual - German - 234 pages

HP LASERJET PRO 200 COLOR MFP M276 User Manual - Dutch - 230 pages

HP LASERJET PRO 200 COLOR MFP M276 Installation Guide - All languages - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info