582866

HP LASERJET PRO 200 COLOR M251 Manual

4
Zoom out
Zoom in
Previous page
1/48
Next page
21
3 4
3
3
EN
1. Connect the power cord between the product and a grounded AC outlet. Make sure your power source is adequate for the product
voltage rating. The voltage rating is on the product label. The product uses either 100-127 Vac or 220-240 Vac and 50/60 Hz.
CAUTION: To prevent damage to the product, use only the power cord that is provided with the product.
2. Turn on the product.
3. Follow the instructions on the control panel.
4. M251n: To verify that your product prints, press OK, select Reports, and then select Conguration Report. Press OK.
M251nw: To verify that your product prints, touch the Setup
button, touch Reports, and then touch Conguration Report.
FR
1. Branchez le cordon d’alimentation entre le produit et une prise CA avec mise à la terre. Assurez-vous que votre source
d’alimentation est adaptée à la tension nominale du produit. La tension nominale est indiquée sur l’étiquette du produit.
Le produit utilise 100-127 volts c.a. ou 220-240 volts c.a. et 50/60 Hz.
ATTENTION : An d’éviter d’endommager le produit, utilisez uniquement le cordon d’alimentation fourni avec le produit.
2. Mettez le produit sous tension.
3. Suivez les instructions qui s’afchent sur le panneau de commande.
4. M251n : pour vérier que votre appareil imprime correctement, appuyez sur OK, sélectionnez Rapports, puis Rapport
de conguration. Appuyez sur OK.
M251nw : pour vérier que votre appareil imprime correctement, appuyez sur la touche Conguration
, puis Rapports, et enn
Rapport de conguration.
DE
1. Verbinden Sie das Netzkabel mit dem Produkt und einer geerdeten Wechselstromsteckdose. Stellen Sie sicher, dass Ihre Stromquelle
für die Betriebsspannung des Geräts geeignet ist. Die Betriebsspannung nden Sie auf dem Geräteetikett. Das Gerät verwendet
entweder 100 bis 127 Volt Wechselspannung oder 220 bis 240 Volt Wechselspannung und 50/60 Hz.
ACHTUNG: Um Schäden am Gerät zu vermeiden, sollten Sie ausschließlich das Netzkabel verwenden, das im Lieferumfang des Geräts
enthalten ist.
2. Schalten Sie das Gerät ein.
3. Befolgen Sie die Anweisungen auf dem Bedienfeld.
4. M251n: Um zu überprüfen, ob das Produkt druckt, drücken Sie OK, wählen Sie Reports (Berichte) und anschließend Conguration
Report (Kongurationsbericht). Drücken Sie OK.
M251nw: Um sicherzustellen, dass Ihr Gerät druckt, berühren Sie die Schaltäche Setup (Einrichtung)
, dann Reports (Berichte) und
anschließend Conguration Report (Kongurationsbericht).
IT
1. Collegare il cavo di alimentazione del prodotto a una presa elettrica con messa a terra. Accertarsi che la fonte di alimentazione
sia adeguata alla tensione nominale del prodotto. L’indicazione della tensione si trova sull’etichetta del prodotto. Il prodotto utilizza
100-127 V CA o 220-240 V CA e 50/60 Hz.
ATTENZIONE: per evitare di danneggiare il prodotto, utilizzare solo il cavo di alimentazione fornito in dotazione.
2. Accendere il prodotto.
3. Attenersi alle istruzioni visualizzate sul pannello di controllo.
4. M251n: Per vericare che il prodotto stampi, premere OK, selezionare Rapporti, quindi Rapporto congurazione. Premere OK.
M251nw: Per vericare che il prodotto in uso sia in grado di stampare, toccare il pulsante Impostazione
, toccare Rapporti, quindi
Rapporto congurazione.
M251nwM251n
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET PRO 200 COLOR M251 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET PRO 200 COLOR M251 in the language / languages: All languages as an attachment in your email.

The manual is 6,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP LASERJET PRO 200 COLOR M251

HP LASERJET PRO 200 COLOR M251 User Manual - English - 146 pages

HP LASERJET PRO 200 COLOR M251 User Manual - German - 158 pages

HP LASERJET PRO 200 COLOR M251 User Manual - Dutch - 154 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info