461070
73
Zoom out
Zoom in
Previous page
1/86
Next page
Adhesive Label Specifications
Use the following guidelines when selecting labels:
The top sheet (printing surface) must be of copier quality and provide
good toner adhesion.
The carrier sheet must be compatible with the temperatures and
pressure of the fusing process, and must be coated for easy release of
the top sheet.
The adhesive must be stable at the 392° F (200° C) temperature
encountered for 0.1 second in the printers fusing process, and must
not produce emissions that exceed exposure levels or threshold limits
established by OSHA and other safety agencies. Adhesives must not
come into direct contact with any part of the printer.
Labels should be arranged on the carrier sheet so that any exposed
spaces run lengthwise down the sheet. Using label stock with spaces
between the horizontal rows of labels can result in labels peeling off
during printing, causing serious jamming and possible printer damage.
CAUTION
Hewlett-Packard does not recommend removing any labels from the
carrier sheet and then printing on the remaining labels.
Adhesive Must not be on any external surfaces of the label before, during, or after printing.
Label construction and die-cutting must not allow labels to peel off during transport,
printing, or fusing.
Caliper Must not exceed 0.007 in. (0.19 mm).
Curl In ream: flat within 0.2 in. (5 mm).
Electrical Surface Resistivity 2.0 to 15 x 10
10
ohm per square.
Electrical Volume Resistivity 1.2 to 15 x 10
11
ohm-cm.
Finishing Precision Cut sheet within +/- 0.03 in. (+/- 0.8 mm) of nominal and 0.20° square.
Fusing Compatibility All adhesives, carrier sheets, top sheets, and other materials used in label
construction must be compatible with the heat and pressure of the fusing process.
Materials must not discolor, melt, offset, or release hazardous emissions when
heated to 392° F (200° C) for 0.1 second.
Packaging Moisture-proof wrap to preserve properties.
Shelf Life One year, maximum, stored at 72° F (22° C) and 50% R.H.
Table B-3 Adhesive Label Specifications
B
Print Media
Specifications
EN Print Media Specifications B-5
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Laserjet 5L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Laserjet 5L in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info