Manual HP Laserjet 4050 T (page 98 of 260) (English, Dutch)

23051

Zoom out

Zoom in

1/260

76 Chapter 2: Printing Tasks

If the connection is interrupted before your print job is complete, the

HP Fast InfraRed Receiver status indicator turns off. You have up

to 40 seconds to correct the interruption and continue the job. If the

connection is resumed within this time, the status indicator lights up

again.

Note The connection is permanently broken if the sending port is moved

out of operating range or if anything passing between the ports

blocks transmission for more than 40 seconds. (This block could be

a hand, paper, or even direct sunlight.) Depending on the size of

the job, printing with the HP Fast InfraRed Receiver may be slower

than printing with a cable connected directly to the parallel port.

Interrupting and Resuming Printing

The job interrupt and resume feature lets a user temporarily stop

the job that is currently printing in order to print another job. When

the new job is finished printing, the interrupted job resumes printing.

A user can only interrupt jobs that are printing and collating multiple

copies by connecting to the infrared (FIR) port on the printer and

sending a job to the printer. The printer stops printing the current

job when it reaches the end of the copy it is printing. The printer

then prints the job sent over the FIR connection. When the printer

is done printing that job, it resumes printing the original job with

multiple copies where it left off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HP Laserjet 4050 T in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HP Laserjet 4050 T Manual

Product: