669092
101
Zoom out
Zoom in
Previous page
1/259
Next page
EN Setting the fax error correction 99
Note The default set at the factory for stamp received faxes is Off.
Setting the fax error correction
Normally, the product monitors the signals on the telephone line while it is sending or receiving a
fax. If the product detects an error signal during the transmission and the error correction setting is
on, the product can request that a portion of the fax be resent.
You should only turn error correction off if you are having trouble sending or receiving a fax, and
you want to accept the errors in the transmission. Turning the setting off might be useful when you
are trying to send or receive a fax overseas, or if you are using a satellite telephone connection.
To change the error correction setting
1 Press menu/enter.
2 Use the < and > buttons to select Fax Setup and press menu/enter.
3 Use the < and > buttons to select All Faxes and press menu/enter.
4 Use the < and > buttons to select Error Correction and press menu/enter.
5 Use the < and > buttons to select On or Off and press menu/enter to save your selection.
Note The default set at the factory for error correction is On.
Selecting tone- or pulse-dialing mode
Use this procedure to set the product to tone- or pulse-dialing mode. The default is set to tone.
Leave this as tone unless you know your phone line is incapable of tone dialing.
To select tone- or pulse-dialing
1 Press menu/enter.
2 Use the < or > button to select Fax Setup and press menu/enter.
3 Press > once to select Fax Send Setup and press menu/enter.
4 Use the < or > button to select Dialing Mode and press menu/enter.
5 Use the < or > button to select Tone or Pulse and press menu/enter to save your selection.
Changing redial settings
If the product was unable to send a fax because the receiving fax machine did not answer or was
busy, the product will attempt to redial based on the redial on busy and redial on no answer
options. Use the procedures in this section to turn these options on or off.
Note The product will, by default, redial if the receiving fax machine is busy but will not, by default, redial
if the receiving fax machine does not answer.
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LaserJet 3300mfp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LaserJet 3300mfp in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP LaserJet 3300mfp

HP LaserJet 3300mfp User Manual - German - 277 pages

HP LaserJet 3300mfp User Manual - Dutch - 265 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info