589814
128
Zoom out
Zoom in
Previous page
1/163
Next page
SIM Toolkit
SIM Toolkit (STK) consists of a set of commands that are programmed into the SIM card. The toolkit
defines how the card should interact with the outside world and extends the communication protocol
between the card and the handset. It supports various value added services typically provided by
the operator or third party companies.
Power
Using the Power application you can view the amount of battery power remaining. The Power
application also enables you to set the standby period, duration for turning off, and USB charging
speed for your HP iPAQ.
To change power settings:
1. Tap Start > Settings > System > Power.
2. Tap Advanced and select the length of time the HP iPAQ stays on when using battery power
or AC power.
3. Tap USB Charging and select the Use USB Charging check box to enable USB charging.
Select any of the following options:
Fast ChargeCharges at 500 mAh.
Slow Charge – Charges at 100 mAh.
NOTE: Clearing the Turn off device if not used for check box on the Advanced tab will keep
your HP iPAQ on at all times and will drain the battery. For more information to make the battery last
long between charges, see
Battery saving tips on page 19.
Backlight
The Backlight application enables you to view and change the backlight options, such as brightness
of your HP iPAQ.
To change backlight settings:
1. Tap Start > Settings > System > Backlight.
2. Tap Battery Power or External Power. Select the Turn off backlight if device is not used
for check box and select the duration from the list.
NOTE: Clearing the Turn off backlight if device is not used for check box from the Battery
Power or External Power tab will keep the backlight on at all times and will drain the battery. For
more information to make the battery last long between charges, see
Battery saving tips
on page 19.
Tap Start > Settings > System > Backlight > Brightness. Next, move the slider on the
Backlight screen to set the required level of brightness.
116 Chapter 17 Applications
128


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP iPAQ 900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP iPAQ 900 in the language / languages: English as an attachment in your email.

The manual is 15,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info