589811
28
Zoom out
Zoom in
Previous page
1/96
Next page
Find an IP address
To find an IP address:
1.
Tap the
(iPAQ Wireless) icon.
2.
Tap the
(WLAN) icon to turn on WLAN, and then tap the WLAN tab.
3. Connect to a network automatically or manually by tapping Start > Settings > Connections >
HP iPAQ Wireless > WLAN > View WLAN Networks > Network Adapters.
4. Select a WLAN network. The WLAN IP address is displayed at the bottom of the WLAN screen.
Delete a wireless network
You can delete networks you manually entered. However, if a network was automatically detected, you
cannot delete it.
To delete an existing or available wireless network:
1.
Tap the
(iPAQ Wireless) icon.
2.
Tap the
(WLAN) icon to turn on WLAN, and then tap the WLAN tab.
3. Tap WLAN > View WLAN Networks > Wireless.
4. In the Configure Wireless Networks box, tap and hold the network you want to delete.
5. Tap Remove Settings.
Configure the 802.1x authentication settings
Contact your network administrator to determine if authentication information is needed before
performing these steps.
To configure the 802.1x authentication settings:
1. To manually enter information, tap Start > Settings > Connections > HP iPAQ Wireless >
WLAN > View WLAN Networks.
2. In Configure Wireless Networks list, select the network you want to configure.
3. Tap Next until you reach the second Configure Network Authentication screen.
4. For increased security, select the Use IEEE 802.1x network access control check box, select
the required EAP type, and then tap Finish.
Bluetooth
Bluetooth wireless technology is a short-range data communication technology. It uses frequency
hopping in timeslots and has the ability to simultaneously handle both data and voice transmissions.
Bluetooth signals avoid interference from other signals by hopping to a new frequency after transmitting
or receiving a data packet. Therefore, this technology is robust, cost-effective, and replaces cables
connecting devices, assuring high levels of security.
20 Chapter 6 Connections
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP iPAQ 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP iPAQ 200 in the language / languages: English as an attachment in your email.

The manual is 6,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info