20164
178
Zoom out
Zoom in
Previous page
1/198
Next page
B-8 ENWW
INSTALL SUPPLIES
Error At least one supply is missing or is installed
incorrectly in the printer, and another supply is
missing, installed incorrectly, out, or low.
Press
(select button) for more information
about specific ink cartridges and printheads.
Install any missing ink cartridges and
printheads. If all are installed, remove the ink
cartridges and printheads. Verify that you are
using the correct ink cartridges and
printheads, and then firmly reinsert them into
the printer. You might need to repeat this
several times.
Be prepared to replace the specific ink
cartridges and/or printheads with new ink
cartridges and/or printheads. For more
information about ink cartridges and
printheads, see Ink cartridges and
Printheads, or visit http://www.hp.com.
LINEFEED
CALIBRATION
FAILED
Warning The linefeed calibration has failed. Make sure
plain letter or A4 paper is loaded in the printer,
and then start the linefeed calibration from the
LCD control panel. For more information, see
Calibrating linefeed.
LOADING PROGRAM XX
Status Fonts and programs are being loaded into the
system RAM. Do not turn off printer.
LOAD TRAY XX
[TYPE] [SIZE]
Error Tray XX is configured for a specific media
type and size required for a print job that has
been sent, but the tray is empty. Load the
specified media type and size into Tray XX.
To override this message and use a media
type and size that is available in another tray,
press
(select button).
MANUALLY FEED
[TYPE] [SIZE]
Error The print job requires a specific media type
and size that is not currently available, or the
print job has specified the Tray 1 as the
source tray. Load the specified media type
and size into Tray 1.
To override this message and use a media
type and size that is available in another tray,
press
(select button).
NO JOB TO CANCEL
Status (cancel job button) has been pressed, but
there are currently no print jobs in the queue
to cancel.
Message Type Description
178


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP INKJET3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP INKJET3000 in the language / languages: English as an attachment in your email.

The manual is 3,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info