20164
21
Zoom out
Zoom in
Previous page
1/198
Next page
ENWW 2-7
3 Lift and push the latch toward the back of the printer (item 3 in
the graphic).
4 Remove each printhead from its package.
5 Remove the protective tape from each printhead.
6 Remove the plastic cap from each printhead by pulling down as
indicated by the arrow on the cap.
7 Insert each printhead into its color-coded slot.
Note The color order of the printheads does not correspond with the color
order of the ink cartridges.
8 Press firmly on each printhead to ensure proper contact
after installation.
9 Pull the latch all the way forward and down, and engage the catch
with the hook (item 2 in the graphic). Push the latch towards the
back of the printer. You might have to apply some pressure to close
the latch.
10 Close the printhead cover and the ink cartridge cover.
11 Wait while the printer aligns the printheads. This can take about 20
minutes. When the process is complete, an alignment page prints.
If no alignment page prints, check to make sure there is media in
the trays.
Step 6: Install the printer software and connect
the interface cable
You can install the printer software for local printing or network printing.
For local printing, you can connect the printer using a USB cable or a
parallel cable.
For more information about using USB or parallel interface
connections with your computer, see the documentation that came
with your computer.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP INKJET3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP INKJET3000 in the language / languages: English as an attachment in your email.

The manual is 3,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info