53436
21
Zoom out
Zoom in
Previous page
1/66
Next page
11
Setting Up Your HP iPAQ
Use the following steps to quickly set up your HP iPAQ and connect it to your
personal computer. The illustrations in the previous sections display the specific
location of the HP iPAQ components.
Step 1: Remove the Battery Cover and Slide In the SIM
1. On the back of the HP iPAQ, press in on the battery cover latch.
2. With your thumb, slide the battery cover down and away from the device.
NOTE If the battery is already installed, remove it before inserting the SIM
card. The SIM card is provided by the mobile phone service provider. The
SIM card may already be preinstalled in your HP iPAQ.
3. Align the notched corner on the card with the notched corner in the
SIM
slot.
4. With the metal contacts facing down, slide the SIM card horizontally into
the SIM slot. Push it in until it stops.
Step 2: Install the Battery and Replace the Battery Cover
1. Align the battery connectors on the battery with the housing pins in the
battery compartment and insert the battery.
NOTE Be sure the pull tab is exposed so the battery can be easily removed.
2. Slide the battery cover on until it clicks into place.
Step 3: Charge the battery
CAUTION To avoid damaging your HP iPAQ or the AC adapter, be sure all
connectors are properly aligned before connecting.
The battery provides power for your HP iPAQ to operate. Your HP iPAQ came with
either a USB synchronization cable or a USB synchronization cradle/charger,
which you must use to charge the device.
It takes about four hours to fully charge the battery.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP hw6910 iPaq at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP hw6910 iPaq in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info