50941
19
Zoom out
Zoom in
Previous page
1/218
Next page
Section 1: Getting Started 19
The RPN and ALG Keys
The calculator can be set to perform arithmetic operations in either RPN
(Reverse Polish Notation) or ALG (Algebraic) mode.
In reverse polish notation (RPN) mode, the intermediate results of calculations
are stored automatically, hence you do not have to use parentheses.
In algebraic (ALG) mode, you perform addition, subtraction, multiplication, and
division in the traditional way.
To select RPN mode: Press f] to set the calculator to RPN mode. When the
calculator is in RPN mode, the RPN status indicator is lit.
To select ALG mode: Press f[ to set the calculator to ALG mode. When
the calculator is in ALG mode, the ALG status indicator is lit.
Example
Suppose you want to calculate 1 + 2 = 3.
In RPN mode, you enter the first number, press the \ key, enter the second
number, and finally press the arithmetic operator key: +.
In ALG mode, you enter the first number, press +, enter the second number,
and finally press the equals key: }.
In RPN mode and algebraic mode, the results of all calculations are listed.
However, in RPN mode only the results are listed, not the calculations.
Most examples in this manual (except those in Appendix B) assume that RPN
mode is selected. Some examples will also be correct if you are in ALG mode.
Simple Arithmetic Calculations in RPN Mode
In RPN mode, any simple arithmetic calculation involves two numbers and an
operation – addition, subtraction, multiplication, or division. To do such a
calculation on your HP 12C Platinum, you first tell the calculator the two
numbers, then tell the calculator the operation to be performed. The answer is
calculated when the operation key (+,-,§, or z) is pressed.
The two numbers should be keyed into the calculator in the order they would
appear if the calculation were written down on paper left-to-right. After keying
in the first number, press the \ key to tell the calculator that you have
completed entering the number. Pressing \ separates the second number to
be entered from the first number already entered.
RPN mode ALG mode
1 \ 2 + 1 + 2 }
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP HP-12c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP HP-12c in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info