214354
60
Zoom out
Zoom in
Previous page
1/85
Next page
60 User’s Guide
Fixing problems
If the image is stretched:
On the projector or remote control, press the picture mode button one or
more times to see if one of the picture modes makes the image the correct
size.
Press menu, go to Picture > Customize picture mode > Stretch. Try
the different settings.
If the source device sends wide-screen output, press menu, go to Picture
> Shape settings, and try setting Widescreen input to Ye s. Otherwise,
set it to No.
If the projected colors seem slightly wrong:
Press menu, go to Picture > Color settings, and adjust the color settings
as needed.
Press menu, go to Picture > Color settings > Color space. Try the
different settings.
Press menu, go to Help > Diagnostics, and run the color test.
If the projected colors seem completely wrong:
Be sure the pins on the cable connectors are not bent or broken.
Press menu, go to Picture > Color settings > Color space. Try the
different settings.
Press menu, go to Help > Diagnostics, and run the color test.
Press menu, go to Picture > Color settings > Reset color settings, and
press ok.
Press menu, go to Setup > Reset all settings, and press ok.
If the picture is not clear (ghost images, smearing, poor quality):
Be sure the video cable you are using is coaxial cable rated at 75 ohms.
Any other cable or impedance rating can reduce picture quality.
The video cable connecting the video source to the projector probably
must be higher quality, especially if the cable is longer than about 3 m
(10 ft). Low-loss cable is recommended for longer distances to avoid
degrading or losing the picture
If a DVI source is not displayed when the DVI port is selected:
Press menu, go to Setup > DVI compatibility, and select Standard
DVI.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP ep 7122 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP ep 7122 in the language / languages: English as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info