582845
123
Zoom out
Zoom in
Previous page
1/203
Next page
Make sure you used the phone cord supplied in the box with the printer to connect to the
telephone wall jack. One end of the phone cord should be connected to the port labeled 1-LINE
on the back of the printer and the other end to your telephone wall jack, as shown in the
illustration.
1 Telephone wall jack
2 Use the phone cord supplied in the box with the printer to connect to the "1-LINE" port
If the phone cord that came with the printer is not long enough, you can use a longer 2-wire
phone cord to extend the length. You can purchase the cord at an electronics store that carries
phone accessories.
Try connecting a working phone and phone cord to the telephone wall jack that you are using for
the printer and check for a dial tone. If you do not hear a dial tone, call your local telephone
company for service.
Other equipment, which uses the same phone line as the printer, might be in use. For example,
you cannot use the printer for faxing if an extension phone is off the hook, or if you are using
a computer dial-up modem to send an email or access the Internet.
Check to see if another process has caused an error. Check the display or your computer for an
error message providing information about the problem and how to solve it. If there is an error,
the printer cannot send or receive a fax until the error condition is resolved.
The phone line connection might be noisy. Phone lines with poor sound quality (noise) can
cause faxing problems. Check the sound quality of the phone line by plugging a phone into the
telephone wall jack and listening for static or other noise. If you hear noise, turn Error Correction
Mode (ECM) off and try faxing again. For information about changing ECM, see
Send a fax in
Error Correction Mode on page 52. If the problem persists, contact your telephone company.
If you are using a digital subscriber line (DSL) service, make sure that you have a DSL filter
connected or you cannot fax successfully.
Click here to go online for more information.
Make sure the printer is not connected to a telephone wall jack that is set up for digital phones.
To check if your phone line is digital, connect a regular analog phone to the line and listen for
a dial tone. If you do not hear a normal sounding dial tone, it might be a phone line set up for
digital phones.
If you are using either a private branch exchange (PBX) or an integrated services digital network
(ISDN) converter/terminal adapter, make sure the printer is connected to the correct port and the
terminal adapter is set to the correct switch type for your country/region, if possible.
Click here to
go online for more information.
ENWW Fax issues 117
123


Need help? Post your question in this forum.

Forumrules
1

Forum

hp-envy-7640-e-series

Reset search

  • I'm using Hallmark greeting card app to make cards now I would like to address envelopes, I need to know how this printer loads the envelopes in the printer to write on them?
    Submitted on 14-9-2021 at 21:35

    Reply Report abuse
  • I cannot find my original password for my HP envy 5540 printer and it wont connect even though it says connected
    Submitted on 2-8-2021 at 11:55

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP ENVY 7640 e series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP ENVY 7640 e series in the language / languages: English as an attachment in your email.

The manual is 6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP ENVY 7640 e series

HP ENVY 7640 e series Quick start guide - English - 70 pages

HP ENVY 7640 e series User Manual - German - 217 pages

HP ENVY 7640 e series Quick start guide - German, Dutch - 70 pages

HP ENVY 7640 e series User Manual - Dutch - 212 pages

HP ENVY 7640 e series Quick start guide - French, Italian, Portuguese, Spanish - 70 pages

HP ENVY 7640 e series Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info