655126
57
Zoom out
Zoom in
Previous page
1/82
Next page
1 Power connection to the printer
2 Connection to a power outlet
2. Look inside the printer and check for a green light indicating the printer is receiving electrical power. If it
is not lit, make sure the cord is fully plugged into the printer, or connect to another power outlet.
3. Look at the On button located on the printer. If it is not lit, the printer is turned off. Press the On button
to turn on the printer.
NOTE: If the printer is not receiving electrical power, connect it to another power outlet.
4. With the printer turned on, disconnect the power cord from the side of the printer under the cartridge
access door.
5. Unplug the power cord from the wall outlet.
6. Wait at least 15 seconds.
7. Plug the power cord back into the wall outlet.
8. Reconnect the power cord to the side of the printer under the cartridge access door.
9. If the printer does not turn on by itself, press the On button to turn on the printer.
10. Try using the printer again.
Fix print quality issues
Step-by-step instructions for resolving most print quality issues Troubleshoot print quality issues online.
Read general instructions in the Help for resolving print quality issues
NOTE: To avoid print quality problems, always turn the printer off using the On button, and wait until the
On button light goes out before you pull the plug or turn off a power strip. This allows the printer to move the
cartridges to a capped position, where they are protected from drying out.
To improve print quality
1. Make sure you are using original HP ink cartridges.
2. Check the printer software to make sure you have selected the appropriate paper type from the Media
drop-down list and print quality from the Quality Settings drop-down list.
In the printer software, click Print & Scan and then click Set Preferences to access the print
properties.
3. Check the estimated ink levels to determine if the cartridges are low on ink. For more information, see
Check the estimated ink levels on page 30. If the ink cartridges are low on ink consider replacing them.
ENWW Printing issues 53
57


Need help? Post your question in this forum.

Forumrules
1

Forum

hp-envy-4526

Reset search

  • I would like to know how to connect the printer to another computer at home. Submitted on 28-7-2020 at 14:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP ENVY 4526 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP ENVY 4526 in the language / languages: English as an attachment in your email.

The manual is 3,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP ENVY 4526

HP ENVY 4526 User Manual - German - 87 pages

HP ENVY 4526 User Manual - Dutch - 86 pages

HP ENVY 4526 Quick start guide - All languages - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info