604793
36
Zoom out
Zoom in
Previous page
1/45
Next page
14. The amount of unallocated capacity (in MB) available to extend the (C:) drive is displayed next to
Select the amount of space in MB (for example, 494098 MB). Subtract the value for the
reserved space to restore the HP directories (calculated above) from the amount of unallocated
capacity (in MB) available to extend the (C:) drive. For example, 494098 MB – 17169 MB =
476929 MB. Replace the Select the amount of space in MB with the calculated capacity (for
example, 476929 MB), or press the down arrow until the calculated number is displayed.
15. Click Next, and then click Finish. The new RAID volume capacity and the new unallocated
capacity are displayed in the Disk Management window.
16. Create the HP_RECOVERY partition as follows:
a. Right-click the Unallocated capacity, and then click New Simple Volume from the drop-
down menu. The New Simple Volume Wizard opens.
b. Click Next.
c. Enter the rounded value from step 11a above in the space provided, and then click Next.
d. Select the drive letter (E:), and then click Next.
e. Select NTFS as the File System. To the right of Volume label, enter the name
HP_RECOVERY.
f. Click Next, and then click Finish.
17. The following steps are needed to create the HP_TOOLS partition. The extra steps are required
because the HP_TOOLS partition must be created as a primary partition. If Disk Management is
used, the partition is created as a logical drive.
a. Open a command line prompt with administrator privileges (Start > All Programs >
Accessories).
b. Right-click Command Prompt, select Run as Administrator, and then type the following
commands:
Diskpart
Select disk 0
Create part primary size=5120
Format fs=fat32 label=”HP_TOOLS” quick
Assign
Exit
18. Restart the computer.
19. In Windows Explorer, copy the contents of the HP_TOOLS and HP_RECOVERY partitions from
the USB drive to the respective partitions.
20. In order for the HP Recovery functionality to work correctly (f11 during POST), the Boot
Configuration Data (BCD) needs to be updated. The following commands must be run in
32 Chapter 5 RAID volume setup
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP EliteBook 2760p at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP EliteBook 2760p in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP EliteBook 2760p

HP EliteBook 2760p User Manual - German - 105 pages

HP EliteBook 2760p User Manual - Dutch - 101 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info