504564
37
Zoom out
Zoom in
Previous page
1/50
Next page
ENWW 5-10
Network printing problem
This section helps you to troubleshoot if you are having difficulties printing to a shared printer.
Check the following:
Make sure the printer is on and the top cover is closed.
Make sure the rear panel knob is in the lock position.
Check that the cartridges are installed properly (see “Replacing the print cartridges”) and
that paper is properly loaded in the printer (see “Loading paper).
Make sure the network cable and the printer cable connections are firmly in place.
If the Resume button is blinking, press it and wait a few seconds for printing to start.
If printing does not resume, check under the printer's top cover for a paper jam. See
“Paper is jammed in the printer” for instructions on clearing paper jams.
After checking the printer, try to print a document from another client over the network.
If the document was sent from another client and printed successfully, your system settings
are probably not configured properly to use this printer. Check with your system administrator
to solve the problem.
If the document did not print successfully from another client:
1 Connect the printer to a PC that is running Windows.
2 Install the printer software if it is not previously installed in this PC.
3 Double-click the Toolbox icon on the desktop or in the printer’s program group.
4 From the Printer Services tab, click Print a Demo Page.
If the demo page printed, your printer is working, but your network settings might not be
configured correctly. Check with your network administrator for more information.
If the demo page did not print, this problem is likely caused by a failure in the printer or
computer system. Call the HP Customer Support Center for help (see “Customer Support).
Before calling, record your serial number and printer model, along with any information about
your computer system that is available.
Uninstalling the printer software
For Windows:
1 Start Windows and make sure no other Windows applications are running.
2 Open Control Panel.
3 Double-click Add/Remove Programs.
4 Select HP Deskjet 9300 series.
5 Follow the onscreen instructions to complete the removal of the printer software.
Sharing the printer in mixed Mac and PC networking environments is not recommended.
You must have administrator privileges to uninstall the printer software in Windows NT 4.0,
Windows 2000, and Windows XP.
If the software was not successfully installed, or the Uninstaller could not be found, run the
scrubber utility from the Starter CD. For Windows 98 and Windows Me, use the scrub98.exe
file located In the Windows\Utils\Scrubber\Win98_Me folder. For Windows 2000 and
Windows XP, use the scrub2k.exe file located in the Windows\Utils\Scrubber\Win2K directory
instead. Repeat the whole installation process again after this is done.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Deskjet 9300 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Deskjet 9300 serie in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Deskjet 9300 serie

HP Deskjet 9300 serie User Manual - Dutch - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info