563359
93
Zoom out
Zoom in
Previous page
1/120
Next page
Control panel error codes and status
Control panel error codes
If the Number of copies icon on the printer display is alternating between the letter E and a number, it
indicates the printer is in an error state. The letter E and the number work as error codes.
Light behavior Cause and Solution
The Number of copies icon is alternating between the letter E
and the number 1. At the same time, the Resume light is
blinking.
The printer receives a printing job, starts feeding paper, and
detects that the paper width for the printing job is bigger than
the width of the loaded paper.
Press either the Resume button ( ) or the Cancel button
( ) to cancel the printing job and eject paper.
To avoid the paper size mismatch problem, do one of the
following before printing.
Change the paper size setting for the printing job to
match the paper loaded.
Remove all paper from the input tray, and then load
paper that matches the paper size setting for the
printing job.
TIP: You can change the default paper size automatically
detected by the printer. For more information, see Change the
default paper size detected by printer on page 14.
The Number of copies icon is alternating between the letter E
and the number 2. At the same time, the Resume light is
blinking.
The printer receives a multipage printing job, detects that the
paper length for the printing job does not match the length of
the loaded paper, and then prints out the rst page of the job
with errors.
To cancel the printing job, press the Cancel button ( ).
To continue printing the remaining pages, press the
Resume button ( ). The remaining pages will have
the same errors as the rst page.
TIP: You can change the default paper size automatically
detected by the printer. For more information, see Change the
default paper size detected by printer on page 14.
The Number of copies icon is alternating between the letter E
and the number 3. At the same time, the Resume light and the
Ink Alert light are blinking.
The carriage inside the printer has stalled.
Open the cartridge access door and make sure the carriage is
not obstructed. Move the carriage to the right, close the
cartridge access door, and then press the Resume button
(
) to continue printing. See Jams and paper-feed issues
on page 70 for more information.
ENWW Control panel error codes and status 89
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Deskjet 3744 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Deskjet 3744 in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Deskjet 3744

HP Deskjet 3744 User Manual - German - 124 pages

HP Deskjet 3744 User Manual - Dutch - 77 pages

HP Deskjet 3744 Installation Guide - All languages - 2 pages

HP Deskjet 3744 Quick start guide - All languages - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info