504599
34
Zoom out
Zoom in
Previous page
1/58
Next page
Traditional wireless connection (requires router)
To connect the HP All-in-One to an integrated wireless WLAN 802.11 network, you will need the following:
A wireless 802.11b/g/n network that includes a wireless router or access point.
NOTE: 802.11n will only support 2.4Ghz
A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer
must be connected to the wireless network that you intend to install the HP All-in-One on.
Network name (SSID).
WEP key or WPA Passphrase (if needed).
To connect the product
1.
Insert the product Software CD in the computer CD-ROM drive.
2.
Follow the instructions on the screen.
When you are prompted, connect the product to the computer using the USB setup cable included in the box. Follow the
onscreen prompts to enter your wireless network settings. The product will attempt to connect to the network. If the
connection fails, follow the prompts to correct the problem, and then try again.
3.
When the setup is finished, you will be prompted to disconnect the USB cable and test the wireless network connection.
Once the product connects successfully to the network, install the software on each computer that will use the product over
the network.
USB Connection (non-network connection)
The HP All-in-One supports a rear USB 2.0 High Speed port for connection to a computer.
NOTE: Web services will not be available with a USB direct connection.
To connect the product with the USB cable
Refer to the setup instructions that came with your product for information on connecting to a computer with a USB cable.
NOTE: Do not connect the USB cable to the product until you are prompted to do so.
If the printer software has been installed, the printer will operate as a plug and play device. If the software has not been installed,
insert the CD that came with the device and follow the onscreen instructions.
Change from a USB connection to a wireless network
If you first setup your printer and installed the software with a USB cable, directly connecting the printer to your computer,
you can easily change to a wireless network connection. You will need a wireless 802.11b/g/n network that includes a wireless
router or access point.
NOTE: 802.11n will only support 2.4Ghz
Change from a USB connection to a wireless network
1. From the computer’s start menu select All Programs or Programs, and then select HP.
2. Select HP Deskjet 3050A J611 series
3. Select Printer Setup and Software Selection.
4. Select Convert a USB connected printer to wireless. Follow the onscreen instructions.
Chapter 8
32 Connectivity
34


Need help? Post your question in this forum.

Forumrules
1

Forum

hp-deskjet-3055a

Reset search

  • My printer won’t connect to the internet why is this Submitted on 30-9-2021 at 16:42

    Reply Report abuse
  • My printer can’t connect to the internet why is that Submitted on 30-9-2021 at 16:35

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Deskjet 3055A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Deskjet 3055A in the language / languages: English as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Deskjet 3055A

HP Deskjet 3055A User Manual - German - 62 pages

HP Deskjet 3055A Installation Guide - Dutch - 2 pages

HP Deskjet 3055A User Manual - Dutch - 60 pages

HP Deskjet 3055A User Manual - French - 62 pages

HP Deskjet 3055A Quick start guide - All languages - 96 pages

HP Deskjet 3055A Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info