20124
20
Zoom out
Zoom in
Previous page
1/404
Next page
Troubleshooting
1-8
HP DesignJet 5000 Series Printers Service Manual
Check Paper Path
This warning appears whenever the friction on the Paper-Axis is too
high: the electrical current needed by the Paper-Axis Motor to move
the paper is too high, so before burning the motor or the Main PCA,
this warning appears. The common reason for this error is an internal
paper jam or at the end of a roll of media the paper is glued to the
media core. It can also be due to a defective motor or Main PCA.
n Check that there are no pieces of paper left inside the Printer,
especially if it happens after a paper jam.
NOTE One way to verify this easily is to take a rigid sheet of paper and
move it along the paper path with the media load lever lifted.
n Also, check that the customer has inserted the spindle hubs
completely, otherwise they may rub against the side plate and
increase the friction.
n If the error still persists, check that the Paper-Axis Motor cables
are connected correctly and that they are not damaged.
n
If the Printer still fails, replace the Paper-Axis Motor
Page
8-100
.
NOTE Turn the Drive Roller by hand once the motor is removed to
verify that it turns smoothly. Also, after replacing the Paper-Axis
Motor,
perform the Media-Axis Test (
Page
4-12
)
and check that
the values are within the given limits
.
n If the Printer still fails, replace the Main PCA Page 8-79.
Check Printhead Path (1)
This warning appears whenever friction on the Scan-Axis is too
high: the electrical current needed by the Scan-Axis Motor to move
the Carriage is too high, so before burning the motor or the Main
PCA, this warning appears. The usual reason for this error is an
internal paper jam, an obstacle in the Printhead path, a broken belt,
badly installed Ink Supply Tubes, etc.
n Apply Oil along the complete axis of the Slider Rods with the
Users Slider Rods Lubrification Kit Page 9-8.
n Also, switch OFF the Printer and move the Carriage from side to
side to verify that it moves smoothly.
n
If the Printer still fails, check that the Scan-Axis motor is connected
correctly to the Main PCA and that the cable is not damaged.
n If the error remains, replace the Belt (Page 8-46) or the Scan-
Axis Motor Page 8-55.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP DESIGNJET5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP DESIGNJET5000 in the language / languages: English as an attachment in your email.

The manual is 47,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info