436321

HP designjet 8000s cutter blade kit Manual

154
Zoom out
Zoom in
Previous page
1/230
Next page
Symptom Possible cause Corrective measure
Parts of a printed image are missing even
after printhead cleaning is performed
repeatedly.
The nozzle is clogged. Wash the printheads. See How do I…
Clean ink system
Poor print quality cannot be improved
even when the cleaning is performed.
The cap or wiper blade is stained. Clean the cap and change the wiper
blade. See
How do I maintain the printer
There is banding on new media The printer requires calibration for the
new media.
Adjust the printer settings for the new
media. See
How do I calibrate my printer
There is banding on media that has been
calibrated and did not give banding
before.
If one of the following is true, try the
corresponding solution and if banding
has not disappeared, then go to the next
possible cause and solution:
1. The file you are printing:
a) is new
b) is not new
2. The print mode:
a) has changed
b) has not changed
3. Normal printhead recovery:
a) did not improve banding
b) improved banding
4. Strong printhead recovery:
a) did not improve banding
b) improved banding
Try one of the following solutions:
1. a) Try using a file that did not give
banding. If banding does not disappear,
then see the next possible cause.
b) Check that you are using the same
print mode as before.
2. a) Try using the same print mode. If
banding does not improve, then try a new
roll of media. If you still see banding call
HP support.
b) Try normal printhead recovery. If
banding improves, repeat normal
printhead recovery until no improvement
is seen and banding is still present. Call
HP support.
3. a) Print the NOZZLE PRINT pattern
and check if there are any printhead
nozzles not working. If some printheads
are not working, try strong printhead
recovery for the affected printheads.
4. a) Call HP support
b) Repeat normal printhead recovery
until no improvement is seen and
banding is still present. Call HP support.
144 Chapter 9 The problem is print quality ENWW
The problem is print quality
… 154 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP designjet 8000s cutter blade kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP designjet 8000s cutter blade kit in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info