436321

HP designjet 8000s cutter blade kit Manual

128
Zoom out
Zoom in
Previous page
1/230
Next page
How do I calibrate my printer
You can adjust the mechanical and electrical settings of your printer based on a series of printed patterns.
These patterns allow you to calibrate your printer settings for the media you are using. Based on the results
of these patterns, you can optimize the performance of your printer.
Calibrate media advance
Your printer was calibrated at the factory to ensure that it advances the media accurately when using
supported media types in normal environmental conditions. However, you may find it useful to recalibrate
in certain circumstances:
●
Unsupported media: different media manufacturers provide media types with a wide range of
properties such as media thickness or stiffness, which may benefit from calibration. You can expect
the best print quality when using HP's recommended media types.
●
Abnormal but stable environmental conditions: if you are printing in unusual conditions of temperature
or humidity (see Tell me about…
Specifications), and those conditions are expected to remain stable,
recalibration may be worthwhile.
However, media advance calibration assumes that you have an image quality problem and that you have
already followed the appropriate troubleshooting procedure for that problem. If you have no particular
problem, there is no need to perform the calibration.
NOTE This procedure describes media advance calibration for all media loaded in the printer.
If you need to calibrate media advance for a specific media only, then define advance using
the MEDIA REG option.
1. Load media widths larger than A1 size and longer than 1 m.
NOTE If you intend to use TENSION winding on the take-up reel, set media advance in
tension winding mode.
A longer print length is required in the tension winding mode.
2. Press the ONLINE key.
3. Select M_ADV using the key.
Select MEDIA ADV PRINT and press OK.
Select the print mode you usually use for the media you are calibrating.
118 Chapter 7 How do I get the best image quality ENWW
How do I get the best image
q
ualit
y
… 128 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP designjet 8000s cutter blade kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP designjet 8000s cutter blade kit in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info