436321

HP designjet 8000s cutter blade kit Manual

56
Zoom out
Zoom in
Previous page
1/230
Next page
There are four tasks required to complete loading of media on the take-up reel: The first part of attaching
a roll to the take-up reel is attaching the end of the roll (by tape) to the core tube supplied with the take-up
reel. You can also use an empty cardboard tube. Both types of core must be the same length as the roll
you are using.
●
Set the take-up reel for clockwise or anti-clockwise winding.
●
Define the winding mode.
●
Load media onto the take-up reel.
●
Calibrate media advance.
Set the take-up reel winding direction
Winding for printing on the outside of the roll (3) or the inside of the roll (2) can be selected. When the take-
up reel is not used, set the take-up reel switch to off (1).
NOTE For LOOSE winding mode, make sure that the media passes inside the take-up reel
sensor (1).
If the take-up reel is not used, turn the take-up reel switch off.
Make sure that you change the media roll on the take-up reel before the roll size exceeds the
diameter of the take-up reel media hub. Replace the core tube with a new one to avoid winding
errors.
46 Chapter 3 How do I load/unload media ENWW
How do I load/unload media
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP designjet 8000s cutter blade kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP designjet 8000s cutter blade kit in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info