436321

HP designjet 8000s cutter blade kit Manual

27
Zoom out
Zoom in
Previous page
1/230
Next page
WARNING! The printer has an internal clock which allows it to automatically wash the
printheads, flushing some ink through the printheads, which keeps the printheads in good
condition. The printer automatically washes the printheads regularly after the last printing
process. If the printer is switched Off for a long period, this process does not happen. If the ink
does not flow through the printheads from time to time, the ink will dry inside the nozzles, reaching
a point where it is impossible to recover them and the printheads will fail. This will mean an
expensive printhead replacement.
Automatic maintenance and cleaning will not be performed if you turn off the printer on the front
panel or leave it without media loaded. The printer power switch on the rear of the printer should
only be used when the printer is turned off to move it, to connect it to a computer, or to install or
maintain printer parts.
WARNING! Turn the printer OFF and unplug the power cable from the power outlet in any of
the following cases;
— when placing your hands inside the printer;
— if there is smoke or an unusual smell coming from the printer;
— if the printer is making an unusual noise not heard during normal operation;
— a piece of metal or a liquid (not part of cleaning and maintenance routines) touches internal
parts of the printer;
— during an electrical (thunder/lightning) storm;
— during a power failure.
CAUTION Always hold the power cable by the plug when connecting and disconnecting from
the power outlet. Never pull on the cable because this may damage it and create risk of fire and
electric shock.
▲
Turn off the power by pressing the power on/off key on the front panel for a couple of seconds.
The front panel displays the message above to indicate that a shutdown process is in progress. After the
process ends, the power is turned off.
If you intend to turn the printer off for a short time, you can avoid the printhead wash operation by pressing
the power on/off key while pressing the CANCEL key.
The printhead wash operation is recommended to keep the printheads in good condition.
CAUTION The printer power switch on the rear of the printer should only be used when the
printer is turned off to move it, connect it to a computer, or to install or maintain printer parts.
The printer automatically washes the printheads regularly after the last printing process. We
recommend that the printer power is left on and media is loaded.
ENWW Turn the power on/off 17
How do I… (basic operation
to
p
ics
)
?
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP designjet 8000s cutter blade kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP designjet 8000s cutter blade kit in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info