724473
188
Zoom out
Zoom in
Previous page
1/235
Next page
Code Short message Suggested action
83.y:1x Stacker internal error
Reset stacker
The print job is automatically canceled and cut. Switch the
stacker off and then on again. If the problem remains, remove
the stacker and continue printing without it.
84.1x:01 Possible paper jam A paper jam has been detected in drawer 1. See A paper jam
(paper stuck in the printer) [4520] on page 133.
84.2x:01 Possible paper jam A paper jam has been detected in drawer 2. See A paper jam in
drawer 2 [4520] on page 142.
86:01 Possible paper jam A paper jam has been detected in the platen area. See A paper
jam (paper stuck in the printer) [4020] on page 131 or A paper
jam (paper stuck in the printer) [4520] on page 133.
Stacker communication error. Check
connections.
No communication received from the stacker. Connect the
stacker or turn it on.
Stacker disengaged. Attach it to printer. Switch off the stacker, attach it to the printer, then switch it on
again. Check that the height of the stacker is correctly adjusted.
Stacker full of media Remove the accumulated pile of paper from the stacker.
Stacker paper jam Remove the accumulated pile of paper from the stacker. Turn it
off and then on again.
If your printer front panel is displaying an error code which is not in the list above, try the following: restart
the printer (see
Restart on page 16) and/or check to make sure you have the latest firmware and driver
versions (see
Update my printer's firmware on page 116). If the problem persists, contact your customer
service representative.
A “printhead monitoring” message
This is not an error message. The message is displayed whenever the Printhead monitoring option is
set to Intensive. If you change the setting to Optimized, the message will not appear. See
Manage
printhead monitoring on page 97.
A “printheads are limiting performance” message
This message appears on the front panel during printing when the printer has detected that one or more
printheads are not performing optimally, and so it needs to make extra passes to maintain print quality.
To eliminate this message, choose one of the following:
Select a higher print quality; see
Change the print quality on page 57.
Clean the printheads; see
Recover (clean) the printheads on page 97.
Use the Image Diagnostics Print to identify which printhead is causing the problem; see
How do
I... (Image Diagnostics Print topics) on page 117.
An “on hold for paper” message [4520]
NOTE: This topic applies to the HP Designjet 4520 Printer series only.
178 Chapter 19 The problem is... (other topics) ENWW
Other problems
188


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Designjet 4020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Designjet 4020 in the language / languages: English as an attachment in your email.

The manual is 10,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Designjet 4020

HP Designjet 4020 User Manual - German - 234 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info