724473
63
Zoom out
Zoom in
Previous page
1/235
Next page
The stacker contains a heated roller to remove the curl from the paper. To change the temperature of
the roller, select the
icon on the printer's front panel, then Accessories > Stacker > Select
temperature level. There are three options:
Normal is the default and recommended setting.
High sets the roller to a higher temperature, which may be useful for particularly stiff paper.
Low sets the roller to a lower temperature, which may be useful for paper with a particularly
sensitive coating.
Change paper rolls while using the stacker
1. Remove the stack of cut paper from the stacker in order to make the stacker easier to handle.
2. Detach the stacker from the printer: first one side, then the other.
3. Change the rolls in the normal way: see
Unload a roll from the printer [4520] on page 36 and Load
a roll into the printer [4520] on page 33.
Clean the exterior of the stacker
See Clean the exterior of the printer on page 112.
Clean the stacker rollers
WARNING! The stacker becomes hot during use. Before cleaning, switch it off and give it time to cool.
Ink tends to stick to the main stacker roller and the small output rollers, which should therefore be cleaned
regularly using a fabric cloth dampened with water.
The frequency with which cleaning is needed depends to some extent on the paper type in use.
For plain, coated or heavyweight coated paper, once a month may be sufficient.
For translucent, vellum, glossy or natural tracing paper, cleaning may be required once a week
even with the slowest print modes.
ENWW Change paper rolls while using the stacker 53
Stacker
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Designjet 4020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Designjet 4020 in the language / languages: English as an attachment in your email.

The manual is 10,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Designjet 4020

HP Designjet 4020 User Manual - German - 234 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info