724471
52
Zoom out
Zoom in
Previous page
1/53
Next page
Glossary
Bonjour
Bonjour is a networking protocol that uses IP but requires no configuration. You can use Bonjour to connect
your printer to a network if you are running Mac OS.
Gateway
A gateway is a device that is used to provide connectivity between networks; for example, to connect two
physically different networks, to manage the subnets inside of a network or to connect a network to the Internet.
If there are no such devices on the network, the gateway field in the network configuration should be set to the
same value as the IP address, then the Jetdirect card can act as its own gateway.
Hardware address
Every hardware component that is to be connected to a network (network card, Jetdirect print server, and so on)
has a fixed hardware address, which is set during the manufacturing process; it cannot be changed and it
distinguishes all network devices from one another. It is a number of 12 hexadecimal digits.
IP address
An IP address identifies a device in a TCP/IP network. It is composed of four bytes that can each take a value of
between 0 and 255 (inclusive).
Example: 15.180.32.45
IP addresses can be changed, so it is possible to have two devices with the same IP address. If two devices in
the same network have the same IP address, there will be conflicts, so special care must be taken when
configuring the IP parameters for the network devices. Jetdirect cards come supplied with the IP address
unconfigured, to avoid conflicts with other devices in the network. When the network card is first connected, it
takes the IP address value 0.0.0.0. After a few minutes of being connected, the IP address changes to the
default and non-valid value 192.0.0.192.
Subnet mask
The IP address of your printer contains sections that identify the network, the subnet, and the host within the
subnet.
The subnet mask is used to separate and identify the bits of the IP address that are used for every section. Two
devices that use different subnet masks won’t see each other even if they are physically connected to the same
network. So the subnet mask has to be configured carefully and by following the instructions of your network
administrator.
Example: 255.255.248.0
Syslog server
A syslog server is a device in the network that can receive and process status and error messages from the rest
of network devices. If there is no syslog server on the network, it is recommended to set this value to 0.0.0.0 in
order not to generate unnecessary traffic on the network.
46 Glossary ENWW
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Designjet 111 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Designjet 111 series in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Designjet 111 series

HP Designjet 111 series User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info