724471
49
Zoom out
Zoom in
Previous page
1/53
Next page
When you insert the tray, you should hear a click as the latches are pushed back; when you remove
the tray, the latches click as they move forward.
The printer won’t take paper from the tray
1. Remove the tray from the printer.
2. Make sure that you have not put too many sheets in the tray. The tray will hold 70 sheets of plain
paper, 50 sheets of coated paper, or 20 sheets of glossy paper
3. A newly opened packet of paper may need 'breaking', that is, the pages may need to be
separated.
4. Make sure that the paper is correctly placed in the tray, tight against the far right corner of the
tray.
5. Make sure that the two width and depth adjusters are up against the block of paper.
6. Place the tray back into the printer, making sure that it is fully inserted.
HP Gloss Paper pages stick together
When one page of HP Gloss is printed and stacked on top of another, they can stick together.
It takes longer than average for the ink to be absorbed into the paper and therefore more time for the
ink to dry.
There is a default Dry time on setting in the HP Designjet software, which slows the release of a
follow-on print. If there will be unattended printing and therefore stacking, it is best to leave this option
on. If you want to have the prints released faster, the paper will have to be taken off the output tray
after it is printed. The dry time setting in the HP Designjet software will protect stacks of two or three
sheets from image transfer on the output tray. However, HP cannot guarantee that there will not be
image transfer in larger stacks of paper. The transfer is proportional to the weight of the stack and will
not be reduced significantly by increasing the dry time setting further.
NOTE: Letting the samples dry overnight should improve the stackability.
To prevent smearing, allow the print to complete its full print cycle (which includes a built-in dry time).
High ink density and a cold humid environment may require extra dry time for your prints.
NOTE: In premium mode, the proof should not be stacked if possible, as dry time is longer. While
dry time is five minutes for a proof in best mode, it takes ten minutes to dry for a proof in premium
mode.
Always handle the paper carefully and by the edges. Avoid excessive folding and handling before and
after printing to prevent damage to material coating.
ENWW The printer won’t take paper from the tray 43
General issues
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Designjet 111 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Designjet 111 series in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Designjet 111 series

HP Designjet 111 series User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info