584776

HP Color LaserJet Pro MFP M177 Manual

113
Zoom out
Zoom in
Previous page
1/122
Next page
5. Verify that the telephone service supports analog fax.
NOTE: HP products are designed specifically for use with analog phone services.
●
If using ISDN or digital PBX, contact your service provider for information about configuring to an
analog fax line.
●
If using a VoIP service, change the Fax Speed to Slow(V.29) from the control panel. Ask if your
service provider supports fax and for the recommended fax modem speed. Some companies might
require an adapter.
●
If you are using a DSL service, make sure that a filter is included on the phone-line connection to
the product. Contact the DSL service provider, or purchase a DSL filter if you do not have one. If a
DSL filter is installed, try another filter because filters can be defective.
6. If the error persists, find more detailed problem-solving solutions in the sections that follow this one.
Faxes are sending slowly
The product is experiencing poor phone line quality.
●
Retry sending the fax when the line conditions have improved.
●
Check with the phone service provider that the line supports fax.
●
Use white paper for the original. Do not use colors such as gray, yellow, or pink.
●
Divide large fax jobs into smaller sections, and then fax them individually.
●
Turn off the Error Correction setting:
1.
From the Home screen on the product control panel, touch the Setup
button.
2. Select Service, and then select Fax Service.
3. Select Error Correction, and then select Off.
NOTE: Turning off Error Correction can reduce image quality.
●
Increase the Fax Speed setting:
1.
From the Home screen on the product control panel, touch the Setup
button.
2. Select Fax Setup, and then select Advanced Setup.
3. Select Fax Speed, and then select the correct setting.
●
Change the fax settings on the control panel to a lower resolution:
NOTE: Higher resolution faxes can take longer to send than lower resolution faxes.
1.
From the Home screen on the product control panel, touch the Setup
button.
2. Select Fax Setup, and then select Advanced Setup.
3. Select Fax Resolution, and then select the correct setting.
ENWW Solve fax problems 103
… 113 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Color LaserJet Pro MFP M177 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Color LaserJet Pro MFP M177 in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Color LaserJet Pro MFP M177

HP Color LaserJet Pro MFP M177 User Manual - German - 126 pages

HP Color LaserJet Pro MFP M177 User Manual - Dutch - 124 pages

HP Color LaserJet Pro MFP M177 Quick start guide - All languages - 48 pages

HP Color LaserJet Pro MFP M177 Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info