582840

HP Color LaserJet 2500 series Manual

4
Zoom out
Zoom in
Previous page
1/36
Next page
EnglishFrançaisDeutschItalianoEspañolNederlandsPortuguês
3
2
742.9 mm (29.25 in)
318 mm (12.53 in)
366 mm (14.41 in)
504 mm (19.84 in)
3
Prepare the location. Place the printer on a sturdy, level surface in a
well-ventilated area. Make sure there is enough space around the printer
so that the air vents on the left side and rear of the printer are not blocked.
Regulate the environment. Do not place the printer in direct sunlight or
an area that has abrupt temperature and humidity changes.
Recommended ranges: 20° to 27° C (68° to 81° F) and 20 to 70% relative
humidity.
Choisissez l'emplacement. Placez l'imprimante sur une surface plane et
stable, dans une zone bien aérée. Veillez à ce qu'il y ait suffisamment
d'espace autour de l'imprimante afin que les grilles d'aération situées sur
la gauche et à l'arrière de l'imprimante ne soient pas obstruées.
Environnement ambiant. N'exposez pas l'imprimante à la lumière directe
du soleil et ne la placez pas dans un endroit où la température et
l'humidité peuvent changer brusquement. Plages recommandées : De 20
à 27 °C et de 20 à 70 % d'humidité relative.
Preparazione del luogo di installazione. Posizionare la stampante su
una superficie piana e stabile, in un'area ben ventilata. Assicurarsi che vi
sia sufficiente spazio intorno alla stampante in modo che le prese d'aria
sul lato sinistro e sul retro della stampante non siano ostruite.
Condizioni ambientali. Non esporre la stampante alla luce diretta del
sole e non collocarla in un'area soggetta a frequenti e bruschi
cambiamenti di temperatura e umidità. Intervalli consigliati: 20° - 27° C
(68° - 81° F) e 20 - 70% di umidità relativa.
Prepare el emplazamiento. Coloque la impresora en una superficie
resistente y nivelada en una zona ventilada. Asegúrese de que haya
suficiente espacio alrededor para que los respiraderos de la parte
izquierda y posterior de la impresora no se bloqueen.
Adecue el entorno. No exponga la impresora a la luz directa del sol ni la
coloque en un área que tenga cambios bruscos de temperatura y
humedad. Rangos recomendados: de 20 a 27 °C (68 a 81 °F) y de 20 a
70% de humedad relativa.
Bereid de plaatsing van de printer voor. Plaats de printer op een
stevige, vlakke ondergrond in een goed geventileerde ruimte Zorg dat er
genoeg ruimte rondom de printer is zodat de ventilatieopeningen aan de
linker- en achterzijde van de printer niet worden geblokkeerd.
Zorg voor een geschikte omgeving. Zet de printer niet in direct zonlicht
of op een plaats waar de temperatuur en luchtvochtigheid abrupt kunnen
veranderen. Aanbevolen temperaturen en luchtvochtigheid: 20° tot 27° C
(68° tot 81° F) en 20 tot 70% relatieve luchtvochtigheid.
Prepare o local. Coloque a impressora sobre uma superfície firme e
nivelada, numa área bem ventilada. Verifique se há espaço suficiente ao
redor da impressora para que as saídas de ventilação do lado esquerdo e
traseiro da impressora não fiquem bloqueadas.
Ajuste o ambiente. Não coloque a impressora em contato direto com a
luz solar nem em áreas que sofram mudanças bruscas de temperatura e
umidade. Faixas recomendadas: 20° a 27° C e 20 a 70% de umidade
relativa.
Vorbereiten des Standorts. Stellen Sie den Drucker auf eine feste,
ebene Fläche in einem Bereich mit guter Luftzirkulation. Achten Sie
darauf, dass um den Drucker ausreichend Platz vorhanden ist, damit das
Gebläse an der linken Seite und an der Rückseite des Druckers nicht
zugestellt ist.
Anpassen der Umgebung. Stellen Sie den Drucker nicht unter direkter
Sonneneinstrahlung oder an einem Ort mit starken Temperatur- und
Luftfeuchtigkeitsschwankungen auf. Empfohlene
Umgebungsbedingungen: 20 bis 27 °C und 20 bis 70 % relative
Luftfeuchtigkeit.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Color LaserJet 2500 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Color LaserJet 2500 series in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info