Manual Hozelock 2450 (page 4 of 20) (All languages)

661703

Zoom out

Zoom in

1/20

Fast Cart

™

2450

TOOLS REQUIRED

Pozi (cross head) screwdriver

CONTENTS (Fig.1)

A. Fast Cart

- 40m 1/2" (13mm)

- 30m 5/8" (16mm)

. Hose end connector x 2

C. Water stop connector

D. Nozzle

*E. Feeder hose 1/2’’

*E. Feeder hose 5/8’’

F. End plug

G. Handle sleeve

H. Threaded tap connector

*I. Steel tube x 2

*J. Pull along handle

*K.Accessory rack

*L. Handle trim

*M. Screw 38mm long x 4

*N. Screw 19mm long x 2

*NOT AVAILABLE AS SPARE

ASSEMBLY

Remove all components from their

packaging and proceed as follows:

Fig.2 - Locate one of the steel

tubes (I) in to one of the holes in

the handle (J). Rotate the tube to

align the screw holes, and insert

38mm screw (M). Repeat the

procedure for the second tube.

Fig.3 - Locate the accessory rack (K)

over the 2 steel tubes as shown,

and secure to the handle using the

two 19mm screws (N).

Fig.4 - Ensure Fast Cart logo is to

the front (as shown), locate

Handle Trim (L) onto the metal

tubes.

Fig.5 - Ensure the orientation of

the handle assembly is correct (as

shown) align the two tubes into

the casing, and secure using the

two remaining 38mm screws (M).

Fig.6 - Locate the handle sleeve (G)

into the winding handle and snap

into position, secure the sleeve

using the end plug (F) then attach

the STOP connector (C) to the end

of the hose. Locate handle trim (L)

onto the casing and clip into

position.

Fig.7 - Attach a connector (B) to

both ends of the feeder hose (E),

and snap on to inlet of hose cart.

the feeder hose is stored on the

handle of the Fast Cart.

Fig.8 - Attach the nozzle (D) to the

STOP connector (C), already fitted,

then connect the feeder hose to

our tap, using threaded tap

onnectors, with or without the

white adaptor (H).

Fig.9 - When rewinding, ensure

he hose cart is aligned with the

hose.

ATER INLET HOSE

If the water inlet hose supplied is

too short to reach your tap,

eplace it with any good quality

ose.

PRODUCT USE

his cart is designed for external

use only, and is not suitable for use

indoors.

If the hose is to be used around

corners, Hozelock recommends the

use of a hose guide, part number

2392, which is not supplied.

Before using the Fast Cart for the

first time, unwind all the hose,

open the hose end nozzle and run

water through it.

IMPORTANT

If the hose does not rewind fully

when the tap is on, turn off the

tap and open the hose end

nozzle to depressurize the hose,

then rewind.

To prevent damage:

Store the cart inside in winter to

prevent frost damage.

Turn the tap off when not in use.

Frequently check the hose end

fitting is secure.

Do Not!

Wind the hose in without a ball

stop or hose end connector fitted.

Take the main casing apart.

Wind the handle in the opposite

direction to the arrow.

ADVICE AND SPARES

For product advice and spares,

please contact:

Hozelock Consumer Services,

Midpoint Park,

Birmingham,

B76 1AB

Tel: 0121 313 1122

www.hozelock.com

GUARANTEE

This Cart is guaranteed for 2 years

against faults arising from

defective manufacture or

materials.

Please keep your purchase receipt.

Fast Cart

™

2450

OUTILS NECESSAIRE

ournevis à pointe cruciforme

renforcée

CONTENU (Fig.1)

*A. Dévidoir Fast Cart

40m (13mm)

- 30m (16mm)

B. Raccord de fin de tuyau x 2

C. Raccord Stop

D. Lance d’arrosage

*E. Tuyau d’alimentation en eau

13mm

*E. Tuyau d’alimentation en eau

16mm

F. Embout

G. Manchon de manivelle

H. Raccord pour robinets filetés

*I. Tube en acier x 2

*J. Anse de ‘tractage’

*K. Porte accessoires

*L. Moulure pour anse

*M. Vis longueur 38mm x 4

*N. Vis longueur 19mm x 2

*DISPONIBLE : PIECE DETACHEE

ASSEMBLAGE

Retirez toutes les pièces de leur

emballage et procédez comme suit :

Fig.2 – Positionnez un des tubes

d’acier (I) dans un des trous situés

dans la poignée (J). Faites tourner

le tube afin que les trous de vis

correspondent, puis vissez en place

à l’aide d’une des vis de 38mm de

long (M). Répétez l’opération pour

le deuxième tube.

Fig.3 – Positionnez le porte

accessoires (K) par-dessus les deux

tubes d’acier comme indiqué, et

vissez-le à la poignée à l’aide des

deux vis de 19mm de long (N).

Fig.4 – Assurez-vous que le Logo

Fast Cart est placé sur le devant du

dévidoir (comme indiqué),

positionnez la moulure pour anse

(L) sur les tubes métalliques.

Fig.5 – Assurez-vous que

l’orientation de l’assemblage de la

poignée est correcte, comme

indiqué sur le croquis, et faites

correspondre les deux tubes et le

boîtier et vissez en place à l’aide

des deux dernières vis de 38mm de

long (M).

Fig.6 – Positionnez le manchon de

la manivelle (G) dans la manivelle

et poussez pour qu’il s’y enclenche,

enfoncez l’embout (F) pour

maintenir le tout en place, puis

FGB

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hozelock 2450 in the language / languages: All languages as an attachment in your email.

The manual is 2,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hozelock 2450 Manual

Product: