Manual Hozelock 2212 Sensor Controller (page 4 of 68) (All languages)

661665

Zoom out

Zoom in

1/68

21mm G½ (½”) Adaptor

26.5mm G¾ (¾”) Adaptor

33.3mm G1 (1”) Adaptor

Duration dial

LED indicator lights

Water Now button

- On/Off/Override

Hose pipe connector

Light Sensor

Installation & operating instructions

READ THESE INSTRUCTIONS CAREFULLY BEFORE

ATTEMPTING TO USE THIS PRODUCT.

FAILURE TO OBSERVE THE FOLLOWING NOTICES MAY RESULT

IN INJURY OR PRODUCT DAMAGE

General information

THESE INSTRUCTIONS ARE ALSO AVAILABLE ON THE

HOZELOCK WEBSITE.

This product meets the requirements of IP44 and therefore can

be used in exposed weather conditions.

This product is not suitable for supplying drinking water.

Threaded water connections are suitable for hand tightening

only.

This product can be fitted to mains water supply.

This product can be fitted to outdoor water butts or tanks that

have an inline filter fitted before the controller.

Installing the batteries

You must use Alkaline batteries – alternatives will result in

incorrect operation.

Remove the front panel as shown (Fig. 1), gripping the recessed

part and pulling towards you.

Insert 2 x 1.5v AA (LR6) batteries (Fig. 1) and replace the

controller front panel.

IMPORTANT: Rechargeable batteries must not be used.

Replace batteries each season. (max 8 months use, used twice a

day)

When batteries are installed the motor will operate the internal

valve to check that it is ready for use and the batteries installed

have enough charge to safely operate the valve

If the LED indicator flashes red, the batteries need to be

replaced.

Connecting the Sensor Controller to the tap

Choose the correct tap adapter (Fig. 3)

Using the correct adapter(s), attach the controller to the tap and

tighten firmly to avoid leaks. Do not use a spanner or other tool

to tighten as this might damage the threads. (Fig. 4)

Turn on the Tap.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hozelock 2212 Sensor Controller in the language / languages: All languages as an attachment in your email.

The manual is 5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hozelock 2212 Sensor Controller Manual

Product: